Chemical Spray Pyrolysis (CSP) of ZnO and SnO2 is of interest for gas sensor applications. The structural properties of the deposited film can be strongly influenced by deposition conditions. In this work, two solutions consisting of Tin Chloride and Zinc Chloride was sprayed on a heated substrate, where temperature was varied from 400° C to 450° C for ZnO, and from 350° C to 500° C for SnO2. X-ray diffraction and scanning electron microscopy, indicating a non-homogenous-structured film formed at low temperature for both oxides. At 450° C, a porous structure is observed for SnO2. This structure becomes homogenous at higher temperature. It was also found that at temperatures lower than 450° C, substrate temperature has significant impact on the composition of the synthesized films.
Characterization of Metal Oxide Sensor Thin Films Deposited by Spray Pyrolysis
- Views Icon Views
- Share Icon Share
- Search Site
Khatami, SMN, Kuruppumullage, DN, & Ilegbusi, OJ. "Characterization of Metal Oxide Sensor Thin Films Deposited by Spray Pyrolysis." Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition. Volume 10: Micro- and Nano-Systems Engineering and Packaging. San Diego, California, USA. November 15–21, 2013. V010T11A044. ASME. https://doi.org/10.1115/IMECE2013-65136
Download citation file: