The problem of a large isotropic plate with a circular hole or rigid circular inclusion is considered here. The plate experiences transverse shear deformation and is subjected to an arbitrary bending field. By using Reissner’s plate theory, a general solution, in terms of Poisson’s ratio ν, a geometric ratio, and bending moment ratio B, is obtained to satisfy both the boundary conditions along the edge and at great distances from the edge. The stress couple concentration factors are calculated and compared with classical plate theory, three-dimensional elasticity theory, higher-order plate theory, and an experimental result.
Generalized Bending of a Large, Shear Deformable Isotropic Plate Containing a Circular Hole or Rigid Inclusion
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, Dec. 6, 1999; final revision, June 27, 2000. Associate Editor: A. K. Mal. Discussion on the paper should be addressed to the Editor, Professor Lewis T. Wheeler, Department of Mechanical Engineering, University of Houston, Houston, TX 77204-4792, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Search Site
Bert, C. W., and Zeng, H. (June 27, 2000). "Generalized Bending of a Large, Shear Deformable Isotropic Plate Containing a Circular Hole or Rigid Inclusion ." ASME. J. Appl. Mech. March 2001; 68(2): 230–233. https://doi.org/10.1115/1.1348014
Download citation file:
- Ris (Zotero)
- Reference Manager