... , “ Core-Based Evaluation of Associative Polymers as Enhanced Oil Recovery Agents in Oil-Wet Formations ,” ASME J. Energy Resour. Technol. , 140 ( 3 ), p. 032915. 10.1115/1.4038848 [11] Thomas , S. , 2008 , “ Enhanced Oil Recovery—An Overview ,” Oil Gas Sci. Technol.-Revue De l'IFP , 63 ( 1...

... Petroleum wells-drilling Wells-injection Production Oil Gas Geothermal Construction Water flooding is a common process among the enhanced oil recovery methods; however, at long-time water flooding system, changing the pore structure alters some reservoir parameters such as formation...

...Li Jingbin; Zhang Guangqing; Li Gensheng; Huang Zhongwei; Li Weichang Radial jet drilling (RJD) technology is an effective method to enhance oil and gas recovery by penetrating the near-wellbore damage zone, and increasing the drainage radius greatly. Recently, it is identified as a potential...

...Xuyue Chen; Deli Gao; Jin Yang; Ming Luo; Yongcun Feng; Xin Li Exploring and developing oil and gas in deepwater field is an important trend of the oil and gas industry. Development of deepwater oil and gas fields from a platform always requires a number of directional wells or extended reach wells...

...Zheng Zhang; Youming Xiong; Fang Guo Horizontal well drilling technology is widely used in the exploitation of petroleum and natural gas, shale gas, and geothermal resources. The temperature distribution of wellbore and surrounding formation has a significant influence on safe and fast drilling...

... wells-drilling Wells-injection Construction Oil Gas Geothermal Production Modern cement testing equipment relies on ultrasonic measurements in order to estimate the cement strength development over time under the most complex in situ conditions. The market shows an abundance of ultrasonic...

... ECHNOLOGY . Manuscript received January 30, 2015; final manuscript received November 6, 2017; published online March 15, 2018. Assoc. Editor: Antonio J. Bula. 30 01 2015 06 11 2017 Oil reservoirs Petroleum engineering Underground injection Wells-injection Oil Gas Geothermal Gas...

... concentrations results in an increase in drag reduction up to 45% in single-phase water flow and up to 42% in air–water stratified flow. 1 Corresponding author. 04 08 2017 02 12 2017 Oil reservoirs Petroleum transport Wells-injection Pipelines Multiphase flow Oil Gas Geothermal...

... (Zhenhua) Rui. 31 08 2017 20 11 2017 Deep-water petroleum Oil reservoirs Petroleum engineering Petroleum wells-drilling Wells-injection Construction Oil Gas Geothermal Gas reservoirs Production Many methods have been adopted in field operations to protect...

..., and the Cd is the drag coefficient. References [1] Zhou , Q. , Dilmore , R. , Kleit , A. , and Wang , J. Y. , 2014 , “ Evaluating Gas Production Performances in Marcellus Using Data Mining Technologies ,” J. Natural Gas Sci. Eng. , 20 , pp. 109 – 120 . 10.1016/j.jngse...

... of a specific crude oil and to validate PVT testing data from laboratory measurements. The basic properties of these components are presented in Table 2 . The complete original components can be obtained from the literature [ 33 ]. Oil specific gravity, gas oil ratio, oil viscosity, and oil formation volume...

...J. F. Bautista; A. Dahi Taleghani Fluid injection is a common practice in the oil and gas industry found in many applications such as waterflooding and disposal of produced fluids. Maintaining high injection rates is crucial to guarantee the economic success of these projects; however...

...Haijun Wu; Qingjun Du; Jian Hou; Jingsong Li; Ruxiang Gong; Yongge Liu; Zhitao Li In this paper, a reservoir simulation study was conducted for the characterization and prediction of gas breakthrough during the development of cyclic steam and gas stimulation (CSGS) for a horizontal well. A new...

... allocation problems are encountered frequently in oil and gas fields. The main problem in this area is the determination of the optimized well rates subject to different constraints. The reservoir management increased the attention to model-based operation of oil fields using simulators. In fact...

... Underground injection Wells-injection Oil Gas Geothermal Gas reservoirs Underground storage Nowadays, environmental protection is of greater concern than ever, especially the protection of shallow aquifers during and after drilling oil and gas wells. Therefore, preventing the formation of liquid...

.... , 137 ( 3 ), p. 032907 . 10.1115/1.4029669 [5] Luo , S. , and Kelkar , M. , 2012 , “ Infill-Drilling Potential in Tight Gas Reservoirs ,” ASME J. Energy Resour. Technol. , 135 ( 1 ), p. 013401 . 10.1115/1.4007662 [6] Salmachi , A. , Sayyafzadeh , M. , and Haghighi , M...

... in the oil and gas reservoirs cause stress changes within and around the reservoir. These stress changes are sometimes large enough to cause reactivation of faults and natural fractures, create challenges in drilling new wells or maintaining the stability of the existing wells, or induce large displacements...

... failure analysis of fibers in manufacturing composite materials to wellbore integrity in petroleum and subsurface engineering problems. Geothermal energy Petroleum engineering Petroleum wells-drilling Underground injection Wells-injection Construction Oil Gas Geothermal Production...

... is the radius of injection wellbore, and V r is the fracturing fluid velocity. The linearly propagating rectangular shape fractures depicted in Fig. 2( a ) appear often in oil and gas applications because the oil and gas are usually present with distinct boundaries (horizontal lithological bounds...

... deflection from the base line were seen. This is so because nitrogen is an inert gas, which is soluble in water without any further chemical reaction with water or the surrounding carbonate grains. Fig. 11 Resistivity and temperature log during nitrogen storage in saline sample IL-3 Figure 12...