...) plane L = 9.75 m Abbreviations APE = absolute percentage error CFD = computational Fluid Dynamics CSP   = concentrating solar power CTPP = central tower power plants DAPTSC = parabolic trough solar collector direct absorption DSG...

... the best fin spacing for maximum value of heat transmission is in the range of (5–6) mm for Rayleigh number ( 5 ≤ Ra ≤ 10 + 8 ) . Senapati et al. [ 24 ] conducted a computational fluid dynamics study to evaluate the impact of circular fins on free convection from a upright cylinder...

... heat storage unit cells with random and ordered substructure topology were created using synthetic tomography data. Full 3D thermal computational fluid dynamics (CFD) simulations with phase change modeling was performed on 1000+ such structures using effective heat capacity method and temperature...

... 04 09 2021 18 10 2021 multiphase flow gas-solids flow particle-laden flow particle distribution heat transfer computational fluid dynamics Particle-laden gas flows play an important role in many industries including defense, energy/power, and pharmaceuticals. Understanding...

... durations of 1.2 s, 2.2 s, and 4.2 s, respectively. 13 01 2020 04 05 2020 08 07 2020 magnetic refrigeration Weiss mean field theory magnetocaloric effect magnetic regenerator computational fluid dynamics Magnetic refrigeration is considered as one of the most promising...

... received April 23, 2018; final manuscript received July 30, 2018; published online September 5, 2018. Assoc. Editor: Sara Rainieri. 23 04 2018 30 07 2018 Computational fluid dynamics Forced convection Thermal management in the engine compartment of construction machinery...

... fluid dynamics Heat transfer enhancement Heat transfer 27 04 2018 17 07 2018 Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received April 27, 2018; final manuscript received July 17, 2018; published online...

..., in comparison to model-1 at lower Reynolds number (i.e., 3600). The numerical simulation has been performed using computational fluid dynamics to examine the forced, turbulent flow heat transfer under steady-state. The design and simulation of flow through different models has been carried out in three...

...Banjara Kotresha; N Gnanasekaran Two-dimensional computational fluid dynamics simulations of mixed convection heat transfer through aluminum metal foams partially filled in a vertical channel are carried out numerically. The objective of the present study is to quantify the effect of metal foam...

...; published online July 23, 2018. Assoc. Editor: George S. Dulikravich. 06 11 2017 04 06 2018 Computational fluid dynamics Heat and mass transfer In the discussed paper, the transformed momentum and energy equations that have been solved are Eqs. (16)–(18) in Ref. [ 1 ]. In addition...

...” of stable position for single coal particle, “Cml K ” and “Cml Y ” for a coal particle in a motion. Combustion Computational fluid dynamics Energy systems Heat and mass transfer Reactive flows 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication...

... July 23, 2018. Assoc. Editor: Guihua Tang. 11 12 2017 01 05 2018 Computational fluid dynamics Forced convection Heat and mass transfer Heat exchangers Micro heat transfer Nanoscale heat transfer Heat transfer associated with fluid flows through periodic structures...

... in electrical machines. Our analysis focuses on the local convective heat transfer over the internal surface of the vents under a turbulent mass flow rate. To model the cooling installation in this region, computational fluid dynamics simulations and an experiment using particle image velocimetry (PIV...

... No.: NPRP 6-1304-2-525. *Corresponding author: jorge.alvarado@tamu.edu Experimental Angled View S = 0.65 mm S = 1.2 mm S = 2 mm Numerical Side View Experimental Side View 1 Corresponding author. 27 04 2018 09 05 2018 Bubbles Computational fluid dynamics Electronic cooling...

... Computational fluid dynamics Conduction Electronic cooling Energy systems Heat exchangers Heat transfer enhancement Natural convection Porous media Thermal systems Thermophysical properties Mixed convection The study of natural convection in porous media presents a wide interest due to its...

... in risk analysis. In this paper, fire interaction of two high velocity (>10 m/s) jet fires is investigated using computational fluid dynamics (CFD) techniques. Different radiation models are analyzed and validated by experimental data from the literature. Based on the simulation result, the merging...

... Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received December 15, 2017; final manuscript received May 8, 2018; published online June 18, 2018. Assoc. Editor: Yuwen Zhang. 15 12 2017 08 05 2018 Computational fluid dynamics Forced convection Heat...

...; published online June 11, 2018. Assoc. Editor: George S. Dulikravich. 06 11 2017 22 05 2018 Computational fluid dynamics Heat and mass transfer In the discussed paper, the momentum, energy equation, and the concentration of the chemical species A and B equations are as follows...

... 08 2017 22 03 2018 Computational fluid dynamics Evaporation Experimental techniques Heat transfer enhancement Nuclear heat transfer Thermophysical properties Boiling Condensation Boiling Condensation Supercritical fluid (SCF) is a substance normally associated with high...

... Narain. 21 08 2017 14 03 2018 Computational fluid dynamics Heat transfer enhancement Natural convection Thermal systems Mixed convection References [1] Japikse , D. , 1973 , “ Advances in Thermo Syphon Technology ,” Advances in Heat Transfer , Vol. 9 , Academic...