Abstract

Although the quenching performance of various vegetable oils has been reported in the past, reports on the effect of antioxidants on the oxidative stability of these seed oils and on the initial quenching performance are less common. The objective of this work was to assess the effect of the relative oxidative stability of two readily available seed oils with significantly different degrees of saturation, soybean oil and palm oil, on quenching performance and to determine the ability of readily available antioxidants to stabilize these oils. In addition to the determination of relative oxidative stability, a further objective of this work was to assess the effect of antioxidants on the initial quenching performance of soybean oil and palm oil using a cooling curve analysis. The results of these studies are reported here.

References

1.
Jones
,
N.
, “
Managing Used Oil
,”
Lubes ‘n’ Greases
, Vol.
2
, No.
6
,
1996
, pp.
20
21
.
2.
Henry
,
J. A.
, “
Composition and Toxicity of Petroleum Products and Their Additives
,”
Hum. Exp. Toxicol.
, Vol.
17
, No.
2
,
1998
, pp.
111
123
. https://doi.org/10.1191/096032798678908350
3.
Erdman
,
K. D.
,
Kling
,
G. H.
, and
Tharp
,
D. E.
, “
High-Performance Biodegradable Fluid Requirements for Mobile Hydraulic Systems
,”
Paper Number 981518, SAE Technical Paper Series
,
SAE International
,
Warrendale, PA
,
1998
.
4.
Rose
,
B.
, and
Honary
,
L.
, “
A Report on the Field Test Performance of a Soybean-Based Hydraulic Oil
,”
Paper Number 982005, SAE Technical Paper Series
,
SAE International
,
Warrendale, PA
,
1998
.
5.
Kodali
,
D. R.
, “
High Performance Ester Lubricants from Natural Oils
,”
Ind. Lubr. Tribol.
, Vol.
54
, No.
4
,
2002
, pp.
165
170
. https://doi.org/10.1108/00368790210431718
6.
Souza
,
E. C.
,
2007
, “
Estudo da oxidação do óleo de soja com diferentes concentrações de aditivos anti-oxidantes, para uso em tratamentos térmicos de tempera
,” M.S. dissertation,
Universidade de São Paulo
, São Carlos, Brazil (in Portuguese).
7.
Associação Brasileira De Normas Técnicas, “
Produtos de petróleo—Líquidos transparentes e opacos—Determinação da viscosidade cinemática e cálculo da viscosidade dinâmica
,” NBR 10441, Rio de Janeiro, Brazil,
2002
(in Portuguese).
8.
Manning
,
R. E.
, and
Hoover
,
M. R.
, “
Flow Properties and Shear Stability
,”
Manual 37—Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing
,
G. E.
Totten
,
S. R.
Westbrook
, and
R. G.
Shah
, Eds.,
ASTM International
,
West Conshohocken, PA
,
2003
, pp.
833
883
.
9.
Farah
,
A. F.
,
2002
, “
Caracterização de óleos vegetais como alternativa para meios de resfriamento utilizados no tratamento térmico de têmpera
,” Ph.D. dissertation,
Universidade de São Paulo
, São Carlos, Brazil (in Portuguese).
10.
Bashford
,
A.
, and
Mills
,
A. J.
, “
The Development of Improved Additives for Quenching Oils Using Laboratory Simulations
,”
Heat Treat. Met.
, Vol.
11
, No.
1
,
1984
, pp.
9
14
.
11.
Bodin
,
J.
, and
Segerberg
,
S.
, “
Measurement and Evaluation of the Power of Quenching Media for Hardening
,”
Heat Treat. Met.
, Vol.
20
, No.
1
,
1993
, pp.
15
23
.
12.
ISO 9950,
1988
, “
Industrial Quenching Oils—Determination of Cooling Characteristics—Laboratory Test Method
,” International Organization for Standardization, Geneva, Switzerland.
13.
ASTM D6200-01,
2007
, “
Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
,” ASTM International, West Conshohocken, PA.
14.
Souza
,
E. C.
,
Fernandes
,
M. R.
,
Augustinho
,
S. C. M.
,
Canale
,
L. C. F.
, and
Totten
,
G. E.
, “
Comparison of Structure and Quenching Performance of Vegetable Oils
,”
J. ASTM Int.
, Vol.
6
, No.
9
,
2009
, paper JAI102188.
15.
Tensi
,
H. M.
, and
Lainer
,
K.
, “
Wiederbenetzung und Warmeilbergang beim Tauchkiihlen In Hochleistungsolen
,”
Harterei-Technische Mitteilungen
, Vol.
52
,
1997
, pp.
298
303
.
16.
Sherwin
,
E. R.
, “
Antioxidants for Vegetable Oils
,”
J. Am. Oil Chem. Soc.
, Vol.
53
,
1976
, pp.
430
436
. https://doi.org/10.1007/BF02605739
17.
Choe
,
E.
, and
Min
,
D. B.
, “
Mechanisms and Factors for Edible Oil Oxidation
,”
Compr. Rev. Food Sci. Food Saf.
, Vol.
5
, No.
4
,
2006
, pp.
169
186
. https://doi.org/10.1111/j.1541-4337.2006.00009.x
18.
Fox
,
N. J.
, and
Stachowiak
,
G. W.
, “
Vegetable-Based Lubricants—A Review of Oxidation
,”
Tribol Int.
, Vol.
40
,
2007
, pp.
1035
1046
. https://doi.org/10.1016/j.triboint.2006.10.001
19.
Chaiyasit
,
W.
,
Elias
,
R. J.
,
McClements
,
D. J.
, and
Decker
,
E. A.
, “
Role of Physical Structures in Bulk Oils on Lipid Oxidation
,”
Crit. Rev. Food Sci. Nutr.
, Vol.
47
,
2007
, pp.
299
317
. https://doi.org/10.1080/10408390600754248
20.
Miller
,
K. S.
,
Singh
,
R. P.
, and
Farkas
,
B. E.
, “
Viscosity and Heat Transfer Coefficients for Canola, Corn, Palm and Soybean Oil
,”
Journal of Food Processing and Preservation
, Vol.
18
,
1994
, pp.
461
472
. https://doi.org/10.1111/j.1745-4549.1994.tb00268.x
21.
Eklund
,
M.
, “
Response to Different Oxidation Inhibitors for Industrial Lube Base Stocks
,”
Ind. Lubr. Tribol.
, Vol.
54
, No.
5
,
2002
, pp.
202
208
. https://doi.org/10.1108/00368790210697787
22.
Liščić
,
B.
,
Tensi
,
H. M.
,
Totten
,
G. E.
, and
Webster
,
G. M.
, “
Non-Lubricating Process Fluids: Steel Quenching Technology
,”
Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing
,
G. E.
Totten
,
S. R.
Westbrook
, and
R. J.
Shah
, Eds.,
ASTM International
,
West Conshohocken, PA
,
2003
, pp.
587
634
.
23.
Rose
,
A.
, “
The Cooling Capacity of Quenchants
,”
Arch. Eisenhuettenwes
, Vol.
13
, No.
8
,
1940
, pp.
345
354
.
24.
Tagaya
,
M.
, and
Tamura
,
I.
, “
Studies on the Quenching Media (1st Report): An Analysis of Cooling Process During Quenching
,”
Mem. Inst. Sci. Ind. Res., Osaka Univ.
, Vol.
9
,
1952
, pp.
85
102
.
25.
Tagaya
,
M.
, and
Tamura
,
I.
, “
Studies on the Quenching Media (3rd Report): The Cooling Ability of Oils
,”
Technol. Rep. Osaka Univ.
, Vol.
7
, No.
123
,
1957
, pp.
305
319
.
26.
Tawara
,
S.
, and
Kokakuhakusi
, “
Experimental Research on the Cooling Power of Various Quenching Media (Report 1)
,”
Tetsu to Hagane
, Vol.
27
,
1941
, pp. 583–599 (in Japanese).
27.
Adhvaryu
,
A.
,
Biresaw
,
G.
,
Sharma
,
B. K.
, and
Erhan
,
S. Z.
, “
Friction Behavior of Some Seed Oils: Biobased Lubricant Applications
,”
Ind. Eng. Chem. Res.
, Vol.
45
,
2006
, pp.
3735
3740
. https://doi.org/10.1021/ie051259z
28.
Komatsu
,
D.
,
Souza
,
E. C.
,
Carvalho de Souza
,
E.
,
Canale
,
L. C. F.
, and
Totten
,
G. E.
, “
Effect of Antioxidants and Corrosion Inhibitor Additives on the Quenching Performance of Soybean Oil
,”
Strojniški vestnik—Journal of Mechanical Engineering
, Vol.
56
, No.
2
,
2010
, pp.
121
130
.
29.
Tensi
,
H. M.
, “
Wetting Kinematics
,”
Quenching Theory and Technology
, 2nd ed.,
B.
Liščić
,
H. M.
Tensi
,
L. C. F.
Canale
, and
G. E.
Totten
, Eds.,
CRC Press
,
Boca Raton, FL
,
2010
, pp.
179
203
.
30.
Tensi
,
H. M.
,
Stich
,
A.
, and
Totten
,
G. E.
, “
Fundamentals of Quenching
,” Metal Heat Treating, Mar/Apr,
1995
, pp.
20
28
.
31.
Tkachuk
,
T. I.
,
Sheremeta
,
B. K.
,
Rudakova
,
N. Ya.
, and
Orazova
,
M. R.
, “
New Quenching Media Based on Petroleum Oils
,”
Chem. Technol. Fuels Oils
, Vol.
25
, No.
4
,
1989
, pp.
201
203
. https://doi.org/10.1007/BF00721575
32.
Tkachuk
,
T. I.
,
Rudakova
,
N. Ya.
,
Sheremeta
,
B. K.
, and
Al’Tschuler
,
M. A.
, “
Influence of the Component Composition of Quenching Oils on the Cooling Intensity in the Bubble Boiling Period
,”
Metal Science and Heat Treatment
, Vol.
28
, No.
9–10
,
1986
, pp.
755
758
. https://doi.org/10.1007/BF00741868
33.
Fernandes
,
P.
, and
Narayan Prabhu
,
K.
, “
Comparative Study of Heat Transfer and Wetting Behavior of Conventional and Bioquenchants for Industrial Heat Treatment
,”
Int. J. Heat Mass Transfer
, Vol.
51
,
2008
, pp.
526
538
. https://doi.org/10.1016/j.ijheatmasstransfer.2007.05.018
34.
Luo
,
H.
,
Guan
,
Y. C.
, and
Han
,
K. N.
, “
Inhibition of Mild Steel Corrosion by Sodium Dodecyl Benzene Sulfonate and Sodium Oleate in Acidic Solutions
,”
Corrosion
, Vol.
54
, No.
8
,
1998
, pp.
619
627
. https://doi.org/10.5006/1.3287638
35.
Akada
,
T.
, and
Fujii
,
Y.
, “
Functions of Additives (4): Inhibitors of Rust and Corrosion
,”
Jpn. J. Tribol.
, Vol.
4
, No.
4
,
1995
, pp.
313
319
.
36.
Totten
,
G. E.
,
Bates
,
C. E.
, and
Clinton
,
N. A.
, “
Quench Bath Maintenance
,”
Handbook of Quenchants and Quenchant Technology
,
ASM International
,
Materials Park, OH
,
1993
, pp.
191
238
.
This content is only available via PDF.
You do not currently have access to this content.