Skip Nav Destination
Issues
November 2006
ISSN 1546-962X
In this Issue
Research Papers
Effects of Patient and Surgical Alignment Variables on Kinematics in TKR Simulation Under Force-Control
J. ASTM Int.. November 2006, 3(10): 1–14.
doi: https://doi.org/10.1520/JAI100248
Determination of Equilibrium Moisture Content of Building Materials: Some Practical Difficulties
J. ASTM Int.. November 2006, 3(10): 1–9.
doi: https://doi.org/10.1520/JAI100265
New Approaches in Investigation of Removal Mechanisms during Copper Chemical-Mechanical Polishing
J. ASTM Int.. November 2006, 3(10): 1–7.
doi: https://doi.org/10.1520/JAI100287
Prediction of Texture in Cold Flat Rolling of Aluminum Using an Explicit Dynamic Finite Element Model
J. ASTM Int.. November 2006, 3(10): 1–14.
doi: https://doi.org/10.1520/JAI100296
The Effect of Latent Hardening on the Texture of 3004 Aluminum Deformed in Plane Strain, Predicted by an Explicit Dynamic Finite Element Analysis
J. ASTM Int.. November 2006, 3(10): 1–14.
doi: https://doi.org/10.1520/JAI100297
Coolants at Elevated Temperatures
J. ASTM Int.. November 2006, 3(10): 1–10.
doi: https://doi.org/10.1520/JAI100325
Analysis of the VENUS-3 PWR Pressure Vessel Surveillance Benchmark Using TRIPOLI-4.3 Monte Carlo Code
J. ASTM Int.. November 2006, 3(10): 1–9.
doi: https://doi.org/10.1520/JAI100338
An Approach to Determining the Uncertainty in Reactor Test Objects Using Deterministic and Monte Carlo Methods
J. ASTM Int.. November 2006, 3(10): 1–13.
doi: https://doi.org/10.1520/JAI100345
Measurement and Calculation of WWER-440 Pressure Vessel Templates Activity for Support of Vessel Dosimetry
J. ASTM Int.. November 2006, 3(10): 1–10.
doi: https://doi.org/10.1520/JAI100365
Development of a Silicon Calorimeter for Dosimetry Applications in a Water-Moderated Reactor
J. ASTM Int.. November 2006, 3(10): 1–9.
doi: https://doi.org/10.1520/JAI100380
Influence of the Multigroup Approximation on VVER-1000 RPV Neutron/Gamma Flux Calculation
J. ASTM Int.. November 2006, 3(10): 1–6.
doi: https://doi.org/10.1520/JAI100381
Impact of Small Chemistry Variations in Plate and Weld Filler Metal on the Corrosion Performance of Ni-Cr-Mo Alloys2
J. ASTM Int.. November 2006, 3(10): 1–13.
doi: https://doi.org/10.1520/JAI100401
Seismic Performance of Two-Side Structural Silicone Glazing Systems
J. ASTM Int.. November 2006, 3(10): 1–10.
doi: https://doi.org/10.1520/JAI100407
Are Multiaxial Fatigue Criteria Appropriate When Steels with Surface Defects are Subjected to Rolling Contact Fatigue
J. ASTM Int.. November 2006, 3(10): 1–7.
doi: https://doi.org/10.1520/JAI100416
Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications
J. ASTM Int.. November 2006, 3(10): 1–13.
doi: https://doi.org/10.1520/JAI100422
Electrical and Mechanical Properties of Conducive Carbon Black/Polyolefin Composites Mixed With Carbon Fiber
J. ASTM Int.. November 2006, 3(10): 1–8.
doi: https://doi.org/10.1520/JAI100431
Evaluation of the Chinese Accelerated Test for Alkali-Carbonate Reaction
J. ASTM Int.. November 2006, 3(10): 1–10.
doi: https://doi.org/10.1520/JAI100433
Investigation into the Effects of Materials and Mixing Procedures on Air Void Characteristics of Fresh Concrete Using Air Void Analyzer (AVA)
J. ASTM Int.. November 2006, 3(10): 1–15.
doi: https://doi.org/10.1520/JAI100435
Utilization of Discarded Fly Ash as a Raw Material in the Production of Portland Cement
J. ASTM Int.. November 2006, 3(10): 1–14.
doi: https://doi.org/10.1520/JAI100449
New Durable Sealant of Telechelic Polyacrylate
J. ASTM Int.. November 2006, 3(10): 1–9.
doi: https://doi.org/10.1520/JAI100450
Effect of Fluoride on Corrosion of Cooling System Metals in Ethylene Glycol-Based Antifreeze/Coolants
J. ASTM Int.. November 2006, 3(10): 1–10.
doi: https://doi.org/10.1520/JAI100505
Hertzian Fracture, Kinetic Friction and the Mechanical Impact LOX Compatibility Testing of Polymers and Polymer Matrix Composites
J. ASTM Int.. November 2006, 3(10): 1–33.
doi: https://doi.org/10.1520/JAI100549
A Comparison of Predictions From Probabilistic Crack Growth Models Inferred From Virkler's Data
J. ASTM Int.. November 2006, 3(10): 1–11.
doi: https://doi.org/10.1520/JAI100574
A New Concept for Leak Testing Environmental Enclosure Filtration Systems
J. ASTM Int.. November 2006, 3(10): 1–11.
doi: https://doi.org/10.1520/JAI100618
New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites
J. ASTM Int.. November 2006, 3(10): 1–5.
doi: https://doi.org/10.1520/JAI13036
A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products
J. ASTM Int.. November 2006, 3(10): 1–13.
doi: https://doi.org/10.1520/JAI14022
Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches
J. ASTM Int. (April 2010)
Principles of Variable Amplitude Fatigue Design and Testing
J. ASTM Int. (November 2004)
Creation of Oxidized Zirconium Orthopaedic Implants
J. ASTM Int. (July 2005)
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
J. ASTM Int. (January 2008)
ZIRLOTM Cladding Improvement
J. ASTM Int. (July 2008)
