Skip Nav Destination
Issues
Research Papers
Correlation Between Chemical Composition of Steel, Optimal Hardened Layer, and Optimal Residual Stress Distribution
J. ASTM Int.. March 2011, 8(3): 1–16.
doi: https://doi.org/10.1520/JAI102788
Unique Calibration Case Study for Predictive Model of Installation Loads for Directional Drilled Fusible PVC Pipe
J. ASTM Int.. March 2011, 8(3): 1–12.
doi: https://doi.org/10.1520/JAI102859
Building Knowledge from Failure Analysis of Plastic Pipe and Other Hydraulic Structures
J. ASTM Int.. March 2011, 8(3): 1–17.
doi: https://doi.org/10.1520/JAI102870
Axial Response of HDPE Pipes as a Result of Installation by Directional Drilling
J. ASTM Int.. March 2011, 8(3): 1–10.
doi: https://doi.org/10.1520/JAI102911
The Use of Topography as an Indicator of Ground Water Flow Direction and Its Implications for Due Diligence
J. ASTM Int.. March 2011, 8(3): 1–13.
doi: https://doi.org/10.1520/JAI103115
Wear Rate in a Series of Retrieved RP Knee Bearings
J. ASTM Int.. March 2011, 8(3): 1–10.
doi: https://doi.org/10.1520/JAI103166
Wear Advantage of a Rotating Bearing Knee–An In Vitro Study
J. ASTM Int.. March 2011, 8(3): 1–6.
doi: https://doi.org/10.1520/JAI103167
CVD of Alternated MCD and NCD Films on Cemented Carbide Inserts
Raonei Alves Campos, Andre Contin, Vladimir Jesus Trava-Airoldi, Danilo Maciel Barquete, Evaldo José Corat
J. ASTM Int.. March 2011, 8(3): 1–10.
doi: https://doi.org/10.1520/JAI103242
The Effect of Si on the Precipitates for Nb Bearing High Purity Ferritic Stainless Steel
J. ASTM Int.. March 2011, 8(3): 1–4.
doi: https://doi.org/10.1520/JAI103250
Control Strategies for an Inline Cooling Device in Hot Strip Processing of Innovative Steel Materials
J. ASTM Int.. March 2011, 8(3): 1–12.
doi: https://doi.org/10.1520/JAI103279
Effect of Gas Pressure on Active Screen Plasma Nitriding Response
J. ASTM Int.. March 2011, 8(3): 1–7.
doi: https://doi.org/10.1520/JAI103286
ZIRLO® Irradiation Creep Stress Dependence in Compression and Tension
J. ASTM Int.. March 2011, 8(3): 1–10.
doi: https://doi.org/10.1520/JAI103297
A Volume of Fluid Phase Change Model on Adaptive Octree Grids
J. ASTM Int.. March 2011, 8(3): 1–21.
doi: https://doi.org/10.1520/JAI103348
Crack Growth Resistance of Laser Surface Remelted Nodular Cast Iron
J. ASTM Int.. March 2011, 8(3): 1–12.
doi: https://doi.org/10.1520/JAI103434
Simulation of Austenitization Processes in Fe–C Steels by Coupled Cellular Automaton and Finite Difference Methods
J. ASTM Int.. March 2011, 8(3): 1–17.
doi: https://doi.org/10.1520/JAI103438
Emulsification Performance Used for NPE Replacement in Solvent-Based Formulations
J. ASTM Int.. March 2011, 8(3): 1–7.
doi: https://doi.org/10.1520/JAI103445
Pilot Evaluation for Lead-Based Paint Proficiency Testing of Field Portable XRF Instruments
J. ASTM Int.. March 2011, 8(3): 1–5.
doi: https://doi.org/10.1520/JAI103465
Development of Two Sample Preparation Methods for Determination of Lead in Composite Dust Wipe Samples
J. ASTM Int.. March 2011, 8(3): 1–11.
doi: https://doi.org/10.1520/JAI103466
Beryllium Measurement in Commercially Available Wet Wipes
J. ASTM Int.. March 2011, 8(3): 1–6.
doi: https://doi.org/10.1520/JAI103489
A Fluorescent Tracer Method for Evaluating Spray Transport and Fate of Field and Laboratory Spray Applications
J. ASTM Int.. March 2011, 8(3): 1–9.
doi: https://doi.org/10.1520/JAI103619
Experimental Investigation of Irradiation Creep and Growth of Recrystallized Zircaloy-4 Guide Tubes Pre-Irradiated in PWR
J. ASTM Int.. March 2011, 8(3): 1–13.
doi: https://doi.org/10.1520/JAI103770
Effects of Contamination on Aerospace Hydraulic Component and System Performance
J. ASTM Int. (October 2008)
Microstructural Stability of M5™ Alloy Irradiated up to High Neutron Fluences
J. ASTM Int. (July 2005)
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
J. ASTM Int. (January 2008)
