Volume 9 Issue 4 | ASTM J. ASTM Int. | ASME Digital Collection

Skip Nav Destination

Research Papers

Laboratory Evaluation Method for the Functional Performance of Total Knee Replacements

Peter S. Walker, Samuel M. Glauber, Haoting Wang

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI103444

Abstract

View articletitled, Laboratory Evaluation Method for the Functional Performance of Total Knee Replacements

Open the PDF for in another window

Characterization of the Master Curve Based Fracture Toughness of ORNL TSE5 Steel and Unirradiated and Irradiated ASTM A203D 3.5 % Ni Steel by the IGCAR Procedure

P. R. Sreenivasan

J. ASTM Int.. April 2012, 9(4): 1–16. doi: https://doi.org/10.1520/JAI103774

Abstract

View articletitled, Characterization of the Master Curve Based Fracture Toughness of ORNL TSE5 Steel and Unirradiated and Irradiated ASTM A203D 3.5 % Ni Steel by the IGCAR Procedure

Open the PDF for in another window

Evaluating the Impact of a Surprise Silicone Additive to a Synthetic Hydrocarbon Lubricant

J. T. Hanks, D. W. Smith, C. J. Stevens, R. E. Winkel

J. ASTM Int.. April 2012, 9(4): 1–17. doi: https://doi.org/10.1520/JAI103909

Abstract

View articletitled, Evaluating the Impact of a Surprise Silicone Additive to a Synthetic Hydrocarbon Lubricant

Open the PDF for in another window

Analysis of the Notch Effect in Fatigue

K. Yanase, M. Endo

J. ASTM Int.. April 2012, 9(4): 1–13. doi: https://doi.org/10.1520/JAI103944

Abstract

View articletitled, Analysis of the Notch Effect in Fatigue

Open the PDF for in another window

Fatigue Crack Growth Rate Behavior of A36 Steel using ASTM Load-Reduction and Compression Precracking Test Methods

J. C. Newman, Jr, B. M. Ziegler, J. W. Shaw, T. S. Cordes, D. J. Lingenfelser

J. ASTM Int.. April 2012, 9(4): 1–15. doi: https://doi.org/10.1520/JAI103966

Abstract

View articletitled, Fatigue Crack Growth Rate Behavior of A36 Steel using ASTM Load-Reduction and Compression Precracking Test Methods

Open the PDF for in another window

The Influence of Headform Circumference and Mass on Alpine Ski Helmet Performance in Laboratory Tests

A. Post, G. Gimbel, T. B. Hoshizaki

J. ASTM Int.. April 2012, 9(4): 1–5. doi: https://doi.org/10.1520/JAI103978

Abstract

View articletitled, The Influence of Headform Circumference and Mass on Alpine Ski Helmet Performance in Laboratory Tests

Open the PDF for in another window

Uncertainties of Responses Calculated with a “Tuned” Library: Geometrical and Algebraic Insights

R. L. Perel

J. ASTM Int.. April 2012, 9(4): 1–13. doi: https://doi.org/10.1520/JAI103992

Abstract

View articletitled, Uncertainties of Responses Calculated with a “Tuned” Library: Geometrical and Algebraic Insights

Open the PDF for in another window

Reactor Pulse-Repeatability Studies at the Annular Core Research Reactor

K. Russell DePriest, Tri Q. Trinh, S. Michael Luker

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI103994

Abstract

View articletitled, Reactor Pulse-Repeatability Studies at the Annular Core Research Reactor

Open the PDF for in another window

A Three-Dimensional Methodology for the Assessment of Neutron Damage and Nuclear Energy Deposition in Graphite Components of Advanced Gas-Cooled Reactors

D. O. Morgan, A. T. Robinson, D. A. Allen, D. J. Picton, D. A Thornton, S. E. Shaw

J. ASTM Int.. April 2012, 9(4): 1–12. doi: https://doi.org/10.1520/JAI104002

Abstract

View articletitled, A Three-Dimensional Methodology for the Assessment of Neutron Damage and Nuclear Energy Deposition in Graphite Components of Advanced Gas-Cooled Reactors

Open the PDF for in another window

Sensitivity studies associated with dosimetry experiment interpretation

S. Bourganel, M. Soldevila, A. Ferrer, G. Grégoire, C. Destouches, D. Beretz

J. ASTM Int.. April 2012, 9(4): 1–9. doi: https://doi.org/10.1520/JAI104011

Abstract

View articletitled, Sensitivity studies associated with dosimetry experiment interpretation

Open the PDF for in another window

Ringhals Unit 3 and 4—Fluence Determination in a Historic and Future Perspective

Eva-Lena Green, Jenny Roudén, Pål Efsing

J. ASTM Int.. April 2012, 9(4): 1–9. doi: https://doi.org/10.1520/JAI104012

Abstract

View articletitled, Ringhals Unit 3 and 4—Fluence Determination in a Historic and Future Perspective

Open the PDF for in another window

Dosimetry Assessments for the Reactor Pressure Vessel and Core Barrel in UK Pressurized Water Reactor (PWR) Plant

D. A. Thornton, D. A. Allen, A. P. Huggon, D. J. Picton, A. T. Robinson, R. J. Steadman, T. Serén, M. Lipponen, T. Kekki

J. ASTM Int.. April 2012, 9(4): 1–14. doi: https://doi.org/10.1520/JAI104016

Abstract

View articletitled, Dosimetry Assessments for the Reactor Pressure Vessel and Core Barrel in UK Pressurized Water Reactor (PWR) Plant

Open the PDF for in another window

Measurements of Actinide-Fission Product Yields in Caliban and Prospero Metallic Core Reactor Fission-Neutron Fields

P. Casoli, N. Authier, J. Laurec, E. Bauge, T. Granier

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104018

Abstract

View articletitled, Measurements of Actinide-Fission Product Yields in Caliban and Prospero Metallic Core Reactor Fission-Neutron Fields

Open the PDF for in another window

Uncertainty-Accounted Calculational–Experimental Approach for Improved Conservative Evaluations of VVER RPV Radiation Loading Parameters

P. G. Borodkin, G. I. Borodkin, N. N. Khrennikov

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104019

Abstract

View articletitled, Uncertainty-Accounted Calculational–Experimental Approach for Improved Conservative Evaluations of VVER RPV Radiation Loading Parameters

Open the PDF for in another window

Application of Ex-vessel Neutron Dosimetry Combined with In-core Measurements for Correction of Neutron Source Used for Reactor Pressure Vessel Fluence Calculations

P. G. Borodkin, G. I. Borodkin, N. N. Khrennikov, J. Konheiser

J. ASTM Int.. April 2012, 9(4): 1–13. doi: https://doi.org/10.1520/JAI104022

Abstract

View articletitled, Application of Ex-vessel Neutron Dosimetry Combined with In-core Measurements for Correction of Neutron Source Used for Reactor Pressure Vessel Fluence Calculations

Open the PDF for in another window

Development and Experimental Validation of a Calculation Scheme for Nuclear Heating Evaluation in the Core of the OSIRIS Material Testing Reactor

F. Malouch

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI104026

Abstract

View articletitled, Development and Experimental Validation of a Calculation Scheme for Nuclear Heating Evaluation in the Core of the OSIRIS Material Testing Reactor

Open the PDF for in another window

Comparison of Regulatory Guide 1.99 Fluence Attenuation Methods

Eric N. Jones

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104028

Abstract

View articletitled, Comparison of Regulatory Guide 1.99 Fluence Attenuation Methods

Open the PDF for in another window

Ex-Vessel Neutron Dosimetry Analysis for Westinghouse 4-Loop XL Pressurized Water Reactor Plant Using 3D Parallel Discrete Ordinates Code RAPTOR-M3G

J. Chen, F. A. Alpan, G. A. Fischer, A. H. Fero

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104030

Abstract

View articletitled, Ex-Vessel Neutron Dosimetry Analysis for Westinghouse 4-Loop XL Pressurized Water Reactor Plant Using 3D Parallel Discrete Ordinates Code RAPTOR-M3G

Open the PDF for in another window

Dosimetry Analyses of the Ringhals 3 and 4 Reactor Pressure Vessels

Joel A. Kulesza, Arnold H. Fero, Jenny Roudén, Eva-Lena Green

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI104033

Abstract

View articletitled, Dosimetry Analyses of the Ringhals 3 and 4 Reactor Pressure Vessels

Open the PDF for in another window

Sensitivity of Adjustment to Parameter Correlations and to Response-Parameter Correlations

J. J. Wagschal

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI104044

Abstract

View articletitled, Sensitivity of Adjustment to Parameter Correlations and to Response-Parameter Correlations

Open the PDF for in another window

Exposure Conditions of Reactor Internals of Rovno VVER-440 Nuclear Power Plant Units 1 and 2

O. V. Grytsenko, S. M. Pugach, V. L. Diemokhin, V. N. Bukanov, M. Marek, S. Vandlik

J. ASTM Int.. April 2012, 9(4): 1–5. doi: https://doi.org/10.1520/JAI104050

Abstract

View articletitled, Exposure Conditions of Reactor Internals of Rovno VVER-440 Nuclear Power Plant Units 1 and 2

Open the PDF for in another window

An Alternative Calibration Method for Counting P-32 Reactor Monitors

T. J. Quirk, D. W. Vehar

J. ASTM Int.. April 2012, 9(4): 1–5. doi: https://doi.org/10.1520/JAI104052

Abstract

View articletitled, An Alternative Calibration Method for Counting P-32 Reactor Monitors

Open the PDF for in another window

Comparison of Attenuation Coefficients for VVER-440 and VVER-1000 Pressure Vessels

Milan Marek, Jan Rataj, Stanislav Vandlik

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104055

Abstract

View articletitled, Comparison of Attenuation Coefficients for VVER-440 and VVER-1000 Pressure Vessels

Open the PDF for in another window

Development of INSPCT-S for Inspection of Spent Fuel Pool

William Walters, Alireza Haghighat, Shivakumar Sitaraman, Young Ham

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104070

Abstract

View articletitled, Development of INSPCT-S for Inspection of Spent Fuel Pool

Open the PDF for in another window

Fitting Method for Spectrum Deduction in High-Energy Neutron Field Induced by GeV-Protons Using Experimental Reaction-Rate Data

Y. Kasugai, N. Matsuda, Y. Sakamoto, H. Nakashima, H. Yashima, H. Matsumura, H. Iwase, H. Hirayama, N. Mokhov, A. Leveling, D. Boehnlein, K. Vaziri, G. Lauten, K. Oishi, T. Nakamura

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104074

Abstract

View articletitled, Fitting Method for Spectrum Deduction in High-Energy Neutron Field Induced by GeV-Protons Using Experimental Reaction-Rate Data

Open the PDF for in another window

Photon Spectrum behind Biological Shielding of the LVR-15 Research Reactor

V. Klupák, L. Viererbl, Z. Lahodová, M. Marek, M. Vinš

J. ASTM Int.. April 2012, 9(4): 1–5. doi: https://doi.org/10.1520/JAI104077

Abstract

View articletitled, Photon Spectrum behind Biological Shielding of the LVR-15 Research Reactor

Open the PDF for in another window

A Database-Informed Approach to New Plant Shielding Design

Timothy M. Lloyd

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI104083

Abstract

View articletitled, A Database-Informed Approach to New Plant Shielding Design

Open the PDF for in another window

Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures

Bernhard Weller, Felix Nicklisch, Volker Prautzsch, Iris Vogt

J. ASTM Int.. April 2012, 9(4): 1–17. doi: https://doi.org/10.1520/JAI104088

Abstract

View articletitled, Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures

Open the PDF for in another window

New Work on Updating and Extending the Nuclear Data Standards

A. D. Carlson, V. G. Pronyaev, R. Capote, F. -J. Hambsch, F. Käppeler, C. Lederer, W. Mannhart, A. Mengoni, R. O. Nelson, P. Schillebeeckx, P. Talou, S. Tagesen, H. Vonach, A. Vorobyev, A. Wallner

J. ASTM Int.. April 2012, 9(4): 1–14. doi: https://doi.org/10.1520/JAI104095

Abstract

View articletitled, New Work on Updating and Extending the Nuclear Data Standards

Open the PDF for in another window

Apparatus for Use in Evaluating Protection from Low Pressure Hot Water Jets

S. H. Jalbani, M. Y. Ackerman, E. M. Crown, M. van Keulen, G. Song

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104098

Abstract

View articletitled, Apparatus for Use in Evaluating Protection from Low Pressure Hot Water Jets

Open the PDF for in another window

Path Forward for Dosimetry Cross Sections

P. J. Griffin, C. D. Peters

J. ASTM Int.. April 2012, 9(4): 1–13. doi: https://doi.org/10.1520/JAI104114

Abstract

View articletitled, Path Forward for Dosimetry Cross Sections

Open the PDF for in another window

Updating and Extending the IRDF-2002 Dosimetry Library

Roberto Capote, Konstantin I. Zolotarev, Vladimir G. Pronyaev, Andrej Trkov

J. ASTM Int.. April 2012, 9(4): 1–9. doi: https://doi.org/10.1520/JAI104119

Abstract

View articletitled, Updating and Extending the IRDF-2002 Dosimetry Library

Open the PDF for in another window

Potential of Dynamic-Mechanical Analysis Toward a Complementary Material and System Testing Approach for Structural Glazing

Christoph Recknagel

J. ASTM Int.. April 2012, 9(4): 1–17. doi: https://doi.org/10.1520/JAI104124

Abstract

View articletitled, Potential of Dynamic-Mechanical Analysis Toward a Complementary Material and System Testing Approach for Structural Glazing

Open the PDF for in another window

Jules Horowitz Reactor, a New Irradiation Facility: Improving Dosimetry for the Future of Nuclear Experimentation

Gilles Grégoire, Daniel Beretz, Christophe Destouches

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104127

Abstract

View articletitled, Jules Horowitz Reactor, a New Irradiation Facility: Improving Dosimetry for the Future of Nuclear Experimentation

Open the PDF for in another window

VVER-440 and VVER-1000 Reactor Dosimetry Benchmark —BUGLE-96 Versus ALPAN VII.0

J. I. Duo

J. ASTM Int.. April 2012, 9(4): 1–6. doi: https://doi.org/10.1520/JAI104131

Abstract

View articletitled, VVER-440 and VVER-1000 Reactor Dosimetry Benchmark —BUGLE-96 Versus ALPAN VII.0

Open the PDF for in another window

Modernization of Existing VVER-1000 Surveillance Programs

V. Kochkin, D. Erak, D. Makhotin

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI104139

Abstract

View articletitled, Modernization of Existing VVER-1000 Surveillance Programs

Open the PDF for in another window

Evaluation of the Structural Sealant for Use in a Four-Sided Structural Sealant Glazing Curtain-Wall System for a Hospital Building

A. M. Memari, S. Fisher, C. Krumenacker, K. A. Broker, R. -U. Modrich

J. ASTM Int.. April 2012, 9(4): 1–16. doi: https://doi.org/10.1520/JAI104143

Abstract

View articletitled, Evaluation of the Structural Sealant for Use in a Four-Sided Structural Sealant Glazing Curtain-Wall System for a Hospital Building

Open the PDF for in another window

Development of a Non-Destructive Evaluation Practice of Installed Weatherproofing Sealant Joints Using a Rolling Device—An Introduction to ASTM C 1736

Daniel N. Huff

J. ASTM Int.. April 2012, 9(4): 1–6. doi: https://doi.org/10.1520/JAI104152

Abstract

View articletitled, Development of a Non-Destructive Evaluation Practice of Installed Weatherproofing Sealant Joints Using a Rolling Device—An Introduction to ASTM C 1736

Open the PDF for in another window

Structure Transformations in Multicomponent Amorphous Alloys in Connection with Grain-Boundary Segregations and Temper Embrittlement of Steels

I. V. Lyasotsky, N. B. Dyakonova, D. L. Dyakonov

J. ASTM Int.. April 2012, 9(4): 1–12. doi: https://doi.org/10.1520/JAI104153

Abstract

View articletitled, Structure Transformations in Multicomponent Amorphous Alloys in Connection with Grain-Boundary Segregations and Temper Embrittlement of Steels

Open the PDF for in another window

Testing Damping Performance and Bending Stiffness of Snowboarding Wrist Protectors

Kai-Uwe Schmitt, Frank I. Michel, Florian Staudigl

J. ASTM Int.. April 2012, 9(4): 1–12. doi: https://doi.org/10.1520/JAI104204

Abstract

View articletitled, Testing Damping Performance and Bending Stiffness of Snowboarding Wrist Protectors

Open the PDF for in another window

A Model to Estimate Separator Forces during Ball Speed Variations

Alan Leveille, Peter Frantz, Garry Rosene

J. ASTM Int.. April 2012, 9(4): 1–15. doi: https://doi.org/10.1520/JAI104209

Abstract

View articletitled, A Model to Estimate Separator Forces during Ball Speed Variations

Open the PDF for in another window

Removal of Heavy Metals (Cu, Pb, and Zn) from Contaminated Sediment Using a Flotation Technique

Dileep Palakkeel veetil, Guy Mercier, Jean-Francois Blais

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104210

Abstract

View articletitled, Removal of Heavy Metals (Cu, Pb, and Zn) from Contaminated Sediment Using a Flotation Technique

Open the PDF for in another window

Temperature and Load Interaction Effects on the Fatigue Crack Growth Rate and Fracture Surface Morphology of IN100 Superalloy

Benjamin S. Adair, W. Steven Johnson, Stephen D. Antolovich, Alexander Staroselsky

J. ASTM Int.. April 2012, 9(4): 1–17. doi: https://doi.org/10.1520/JAI104215

Abstract

View articletitled, Temperature and Load Interaction Effects on the Fatigue Crack Growth Rate and Fracture Surface Morphology of IN100 Superalloy

Open the PDF for in another window

Use of Cement-Treated Lightweight Soils Made from Dredged Clay

Yoichi Watabe, Takatoshi Noguchi, Yoshio Mitarai

J. ASTM Int.. April 2012, 9(4): 1–10. doi: https://doi.org/10.1520/JAI104219

Abstract

View articletitled, Use of Cement-Treated Lightweight Soils Made from Dredged Clay

Open the PDF for in another window

Benchmarking of Neutron Production of Heavy-Ion Transport Codes

I. Remec, R. M. Ronningen, L. Heilbronn

J. ASTM Int.. April 2012, 9(4): 1–12. doi: https://doi.org/10.1520/JAI104227

Abstract

View articletitled, Benchmarking of Neutron Production of Heavy-Ion Transport Codes

Open the PDF for in another window

Glass Unit Corner Loading—Key Parameter in Durability

Anneliese Hagl, Oliver Dieterich

J. ASTM Int.. April 2012, 9(4): 1–16. doi: https://doi.org/10.1520/JAI104229

Abstract

View articletitled, Glass Unit Corner Loading—Key Parameter in Durability

Open the PDF for in another window

Bearing Thermal Conductance Measurement Test Method and Experimental Design

Yoshimi R. Takeuchi, Sean E. Davis, Matthew A. Eby, Jerry K. Fuller, Donald L. Taylor, Michael J. Rosado

J. ASTM Int.. April 2012, 9(4): 1–18. doi: https://doi.org/10.1520/JAI104233

Abstract

View articletitled, Bearing Thermal Conductance Measurement Test Method and Experimental Design

Open the PDF for in another window

Naphthalene Sorption to Organic Additives in Cement-Treated Soils

Craig B. Lake, Jill Searle, Evan Bridson-Pateman

J. ASTM Int.. April 2012, 9(4): 1–12. doi: https://doi.org/10.1520/JAI104302

Abstract

View articletitled, Naphthalene Sorption to Organic Additives in Cement-Treated Soils

Open the PDF for in another window

Calculation of Kobasko's Simplified Heat Transfer Coefficients from Cooling Curve Data Obtained with Small Probes

Rosa Lucia Simencio Otero

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI104304

Abstract

View articletitled, Calculation of Kobasko's Simplified Heat Transfer Coefficients from Cooling Curve Data Obtained with Small Probes

Open the PDF for in another window

Easiest Routes and Slow Zones: How Fast Do I Go?: Speeds and Distances of Recreational and Expert Snowsport Participants

Tracey J. Dickson, F. Anne Terwiel, Gordon S. Waddington, Stephen D. Trathen

J. ASTM Int.. April 2012, 9(4): 1–9. doi: https://doi.org/10.1520/JAI104490

Abstract

View articletitled, Easiest Routes and Slow Zones: How Fast Do I Go?: Speeds and Distances of Recreational and Expert Snowsport Participants

Open the PDF for in another window

Alpine Skiing, Telemarking, Snowboarding, and Skiboarding Injuries Related to Gender and Ability

Arne Ekeland, Andreas Rødven

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI104496

Abstract

View articletitled, Alpine Skiing, Telemarking, Snowboarding, and Skiboarding Injuries Related to Gender and Ability

Open the PDF for in another window

Improvement in Efficiency of Ultrasonic Tests for the Macroscopic Inclusions Evaluation

Yosuke Aoyama, Ichiro Takasu, Yasukazu Unigame

J. ASTM Int.. April 2012, 9(4): 1–7. doi: https://doi.org/10.1520/JAI104504

Abstract

View articletitled, Improvement in Efficiency of Ultrasonic Tests for the Macroscopic Inclusions Evaluation

Open the PDF for in another window

Common Mechanisms of Hip Injury and Associated Hip Pathology in Professional Skiers and Snowboarders

Mackenzie M. Herzog, Karen K. Briggs, Marc J. Philippon

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI104511

Abstract

View articletitled, Common Mechanisms of Hip Injury and Associated Hip Pathology in Professional Skiers and Snowboarders

Open the PDF for in another window

Validation of the Performance of Pervious Concrete in a Field Application with Finite Element Analysis

Md. Ashraful Alam, Liv Haselbach, William F. Cofer

J. ASTM Int.. April 2012, 9(4): 1–11. doi: https://doi.org/10.1520/JAI104553

Abstract

View articletitled, Validation of the Performance of Pervious Concrete in a Field Application with Finite Element Analysis

Open the PDF for in another window

Technical Notes

Comparison between Hybrid III Headforms by Linear and Angular Dynamic Impact Response Characteristics

Marshall Kendall, Thomas Blaine Hoshizaki

J. ASTM Int.. April 2012, 9(4): 1–8. doi: https://doi.org/10.1520/JAI104270

Abstract

View articletitled, Comparison between Hybrid III Headforms by Linear and Angular Dynamic Impact Response Characteristics

Open the PDF for in another window

Issues

Research Papers

Technical Notes

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only