Skip Nav Destination
Issues
May 2005
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Technical Papers
Analysis of the Cutting Force Components and Friction in High Speed Machining
J. Manuf. Sci. Eng. May 2005, 127(2): 245–250.
doi: https://doi.org/10.1115/1.1863253
Topics:
Cutting
,
Friction
,
High speed machining
An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling
J. Manuf. Sci. Eng. May 2005, 127(2): 251–261.
doi: https://doi.org/10.1115/1.1863254
Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect
J. Manuf. Sci. Eng. May 2005, 127(2): 262–270.
doi: https://doi.org/10.1115/1.1852571
Frequency Shift in Drilling due to Margin Engagement
J. Manuf. Sci. Eng. May 2005, 127(2): 271–276.
doi: https://doi.org/10.1115/1.1863255
Topics:
Chatter
,
Cutting
,
Drilling
,
Drills (Tools)
,
Springs
,
Stiffness
,
Vibration
,
Dynamics (Mechanics)
,
Displacement
,
Modal analysis
Binderless CBN Tools, a Breakthrough for Machining Titanium Alloys
J. Manuf. Sci. Eng. May 2005, 127(2): 277–279.
doi: https://doi.org/10.1115/1.1852570
Topics:
Cutting
,
Machining
,
Titanium alloys
,
Wear
,
Cutting tools
,
Surface roughness
Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces
J. Manuf. Sci. Eng. May 2005, 127(2): 280–288.
doi: https://doi.org/10.1115/1.1852569
Topics:
Cutting
,
Drilling
,
Drills (Tools)
Dynamics of Initial Penetration in Drilling: Part 2—Motion Models for Drill Skidding and Wandering With Experimental Verification
J. Manuf. Sci. Eng. May 2005, 127(2): 289–297.
doi: https://doi.org/10.1115/1.1852568
Topics:
Drilling
,
Drills (Tools)
,
Rotation
Topology of Spade Drills for Wood Drilling Operations, Part 1: Spade Drill Point Geometry Definition
J. Manuf. Sci. Eng. May 2005, 127(2): 298–309.
doi: https://doi.org/10.1115/1.1794160
Topics:
Cutting
,
Generators
,
Geometry
,
Bits (Tools)
,
Drills (Tools)
Topology of Spade Drills for Wood Drilling Operations Part 2: Spade Drill Point Cutting Geometry Analysis
J. Manuf. Sci. Eng. May 2005, 127(2): 310–318.
doi: https://doi.org/10.1115/1.1794161
Topics:
Cutting
,
Clearances (Engineering)
,
Chisels
,
Drills (Tools)
Parameterized Geometric Design for Complex Helical Drill Point
J. Manuf. Sci. Eng. May 2005, 127(2): 319–327.
doi: https://doi.org/10.1115/1.1794162
Topics:
Chisels
,
Clearances (Engineering)
,
Drills (Tools)
,
Grinding
,
Design
,
Cutting
On a Novel Tool Life Relation for Precision Cutting Tools
J. Manuf. Sci. Eng. May 2005, 127(2): 328–332.
doi: https://doi.org/10.1115/1.1794158
Topics:
Cutting
,
Wear
,
Cutting tools
,
Machining
Microscale Mechanical Behavior of the Subsurface by Finishing Processes
J. Manuf. Sci. Eng. May 2005, 127(2): 333–338.
doi: https://doi.org/10.1115/1.1807853
Topics:
Fatigue
,
Finishing
,
Grinding
,
Machining
,
Mechanical behavior
,
Microscale devices
,
Steel
,
Stress
,
Testing
,
Turning
Quintic Spline Interpolation With Minimal Feed Fluctuation
J. Manuf. Sci. Eng. May 2005, 127(2): 339–349.
doi: https://doi.org/10.1115/1.1830493
Topics:
Interpolation
,
Splines
,
Polynomials
Characterization of the Quasi-static Deformation of LAAG Joints Adhering Machined Steel Surfaces
J. Manuf. Sci. Eng. May 2005, 127(2): 350–357.
doi: https://doi.org/10.1115/1.1807851
Topics:
Adhesives
,
Grippers
,
Shear (Mechanics)
,
Ductility
,
Steel
,
Deformation
,
Adhesive joints
,
Stress
,
Hardening (Curing)
Assembly Fixture Fault Diagnosis Using Designated Component Analysis
J. Manuf. Sci. Eng. May 2005, 127(2): 358–368.
doi: https://doi.org/10.1115/1.1852572
Topics:
Eigenvalues
,
Failure
,
Fault diagnosis
,
Manufacturing
,
Deflection
,
Sheet metal
,
Principal component analysis
,
Statistical analysis
Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels
J. Manuf. Sci. Eng. May 2005, 127(2): 369–375.
doi: https://doi.org/10.1115/1.1794163
Topics:
Deformation
,
Finite element analysis
,
Sheet metal
,
Sheet metal work
,
Engineering simulation
,
Simulation
,
Friction
,
Blanks
Condition Monitoring Using a Latent Process Model with an Application to Sheet Metal Stamping Processes
J. Manuf. Sci. Eng. May 2005, 127(2): 376–385.
doi: https://doi.org/10.1115/1.1870015
Topics:
Condition monitoring
,
Metal stamping
,
Signals
,
Sheet metal
Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM
J. Manuf. Sci. Eng. May 2005, 127(2): 386–393.
doi: https://doi.org/10.1115/1.1794159
Topics:
Deformation
,
Finite element methods
,
Friction
,
Strips
,
Torque
,
Simulation
,
Modeling
,
Boundary-value problems
Wheel-Tooling Gap Measurement System for Conform™ Extrusion Machinery Based on a Capacitive Sensor
J. Manuf. Sci. Eng. May 2005, 127(2): 394–401.
doi: https://doi.org/10.1115/1.1870004
Localized Material and Processing Aspects Related to Enhanced Recycled Material Utilization Through Vibration-Assisted Injection Molding
J. Manuf. Sci. Eng. May 2005, 127(2): 402–410.
doi: https://doi.org/10.1115/1.1870012
Topics:
Injection molding
,
Vibration
,
Molding
,
Recycled materials
The Effect of Adhesive Curing Condition on Bonding Strength in Auto Body Assembly
J. Manuf. Sci. Eng. May 2005, 127(2): 411–419.
doi: https://doi.org/10.1115/1.1870014
Topics:
Adhesives
,
Bonding
,
Fracture (Materials)
,
Hardening (Curing)
,
Heating
,
Temperature
,
Fracture (Process)
Robot Path Planning for Dimensional Measurement in Automotive Manufacturing
J. Manuf. Sci. Eng. May 2005, 127(2): 420–428.
doi: https://doi.org/10.1115/1.1870013
Topics:
Algorithms
,
Path planning
,
Robots
,
Inspection
Technical Brief
A Finite Element Analysis For Stiffness of Fixture Units
J. Manuf. Sci. Eng. May 2005, 127(2): 429–432.
doi: https://doi.org/10.1115/1.1871183
Topics:
Finite element analysis
,
Stiffness
,
Springs
,
Design