... 2011 17 11 2011 15 12 2011 15 12 2011 deformation friction microfabrication microfluidics sheet materials surface finishing surface texture wear surface texturing microchannel microrolling system design Creation of new energy resource and saving of energy...

... moulding microfabrication microsensors process monitoring microinjection molding process monitoring Micro-/mesoscale components and products are gaining an increasing importance in areas such as the health care, IT, communication, medical, pharmaceutical, consumer goods, and automotive...

... electrochemical machining electrolytes microfabrication micromachining resins bipolar current pulsed microelectrochemical machining micromachining adhesion cathode coating Microelectrochemical machining (ECM) is a well known method for the fabrication of microparts, micropatterns...

...Ji Li; Huang Gao; Gary J. Cheng The microscale laser dynamic forming (LDF) process is a high strain rate microfabrication technique, which uses a pulse laser to generate high pressure by vaporizing and ionizing an ablative coating, and thus produces complex 3D microstructures in thin foils. One...

... microfabrication nozzles numerical analysis organic compounds two-phase flow water 19 01 2009 21 06 2010 10 09 2010 10 09 2010 Amsden , B. , 1999 , “ The Production of Uniformly Sized Polymer Microspheres ,” Pharm. Res. 0724-8741 , 16 , pp. 1140 – 1143 . 10.1023...

... for microfabrication Applied power (mW) Scanning speed(mm/min) Photoinitiator concentration(%) Diffraction grating 12.5 5 3.78 Microbridge 15 3 2.56 Prism grating 30 3 3.78 Two photon polymerized 3D microstructures fabricated using the experimental results from this study...

...Huang Gao; Chang Ye; Gary J. Cheng Microscale laser dynamic forming ( μ LDF ) is a novel microfabrication technique to introduce complex 3D profiles in thin films. This process utilizes pulse laser to generate plasma to induce shockwave pressure into the thin film, which is placed above...

... laser pulses result in smoother surfaces. Results on microfabricated nickel samples using laser pulse durations of 300 ns and 650 ns test this hypothesis. Polishing with 300 ns and 650 ns pulse durations results in an average surface roughness of 66 nm and 47 nm, respectively; reductions of 30% and 50...

...Tyler L. Perry; Dirk Werschmoeller; Neil A. Duffie; Xiaochun Li; Frank E. Pfefferkorn The precision of parts created by microfabrication processes is limited by surface roughness. Therefore, as a means of improving surface roughness, pulsed laser micropolishing on nickel was examined numerically...

.... 02 03 2006 26 06 2006 microlenses excimer lasers LIGA laser beam machining micromachining probability polymers moulding hot working embossing surface roughness optoelectronic devices microlens excimer laser microfabrication LIGA-like process In this paper, we...