Abstract
The traditional control methods of instability and deformation of steel structure neglect the analysis of its natural vibration characteristics, which lead to the poor effect of hysteretic vibration of steel structure nodes, and the stability optimization of steel structure is not ideal. Therefore, a new method to control the local instability and deformation of the steel roof is proposed. According to the steel structure composition of the upper door rigid frame and the connection mode of the frame beam and column, the roof steel structure characteristics of the workshop are analyzed. Multi-order natural frequency method is used to obtain the cumulative modal mass contribution rate of steel structure and analyze the natural vibration characteristics of steel structure. Based on the characteristics of natural vibration and element transfer matrix, the local instability control method of roof steel structure is designed. Simulation of strong vibration, using space analysis of tall-building with wall-elements (SATWE) software analysis of strong vibration under elastic load state, to obtain the external deformation of steel structure, under simulation of vibration deformation control model. Taking a chemical plant as an example, a finite element model was established to simulate the vibration wave, and the numerical simulation results of plastic deformation resistance of steel structure were analyzed. The experimental results show that the proposed method can effectively enhance the stability of steel structure and reduce its deformation degree.