... technologies for cold recycling is using foamed asphalt as the stabilizing agent. Various road agencies specified different moisture-conditioning procedures to characterize the moisture susceptibility of foamed cold-mix asphalt (FCMA) mixtures. Three commonly used conditioning procedures are AASHTO T 283...

... in terms of Marshall characteristics and moisture susceptibility. Further, from other tests considered for evaluation, the mixes containing PRCA and WPMP showed much more superior results compared with normal mixes prepared with conventional aggregates. References Esfahani   M. A. , “ Evaluating...

...Said M. Easa The existing Superpave method of evaluating moisture susceptibility is deterministic, relying only on the mean values. This technical note presents a new method for evaluating moisture susceptibility considering uncertainty. The method considers the uncertainties of the four measured...

... the material is not susceptible to severe damage from moisture, although many of these methods have seen mixed amounts of success historically. The main objective of this study is to evaluate the ability of multiple asphalt mixture moisture susceptibility tests to identify good and poor performing mixtures...

... to Assess Moisture Sensitivity of Aggregate-Bitumen Bonds ,” Int. J. Adhes. Adhes. , Vol.  68 , 2016 , pp.  133 – 141 , https://doi.org/10.1016/j.ijadhadh.2016.02.013 Kennedy , T.W. , Roberts , F.L. , and Anagnos , J.N. , “ Texas Boiling Test for Evaluating Moisture Susceptibility...

... stability moisture susceptibility freeze thaw 24 05 2016 02 11 2016 06 10 2017 Journal of Testing and Evaluation doi:10.1520/JTE20160263 / Vol. 46 / No. 1 / January 2018 / available online at www.astm.org M. Hasanuzzaman,1 L. Hashemian,2 and A. Bayat3 Laboratory Investigations...

..., the indirect tensile strength ratio (TSR) is commonly used based on the AASHTO T 283 procedure to evaluate the moisture susceptibility of an asphalt mixture; however, TSR cannot be used as a representative index for the mechanical behavior of the moisture-conditioned asphalt mixture. In this study, the dynamic...

..., such as polymer-modified mixture, to reduce mixing and compacting temperatures. In this study, the performance characteristics of SMA–WMA mixture using new polyethylene wax-based WMA additive were evaluated against the conventional SMA mixture without additive, in terms of the moisture susceptibility...

...Rouzbeh Ghabchi; Dharamveer Singh; Musharraf Zaman; Qingyan Tian This study used a mechanistic framework (i.e., surface free energy) to evaluate the moisture susceptibility of warm mix asphalt (WMA) with three different WMA additives, namely, Sasobit, Advera, and Evotherm. The surface free energy...

...), and ordinary Portland cement (OPC). The AEM design was conducted using a two-stage process to allow for determination of the optimum water content (OWC) and optimum emulsion content (OEC). The effect of the fillers on the mixture performance was evaluated based on moisture susceptibility as measured...

..., was also evaluated to understand the moisture susceptibility of the WMA. The lower the free energy of reduction, the lower the asphalt binder’s tendency to de-bond from aggregates in the presence of moisture. A maximum of 20.5 % and an average of 13.2 % decrease in the free energy of reduction were...

...V. S. Punith; Feipeng Xiao; Serji N. Amirkhanian The objective was to conduct a laboratory investigation of moisture susceptibility and rutting resistance of non-foaming warm mix asphalt (WMA) mixtures containing moist aggregates. Gyration number and weight loss of various samples, indirect tensile...

... on the mixture’s engineering properties. 07 01 2009 24 08 2009 24 09 2009 warm mix additives crumb rubber moisture susceptibility rutting resistance resilient modulus References Putman , B. J. , 2005 , “ Qualification of the Effects of Crumb Rubber in CRM Binder ,” Ph.D...

...Menglan Zeng; Chaofan Wu; Kaiyu Huang Many factors have been identified to have influences on the moisture susceptibility of asphalt mixtures. This research study attempts to evaluate such factors as binder type, aggregate type, mixture type, additive usage, additive type, additive application...