Superalloys are metallic systems commonly used in components for aerospace and energy generation applications. In this paper, results of an investigation developed to analyze the effect of heat treatment on the wear behavior of a Haynes 282® superalloy under sliding, nonlubricated conditions are presented. Room temperature pin-on-roll wear tests were undertaken at a constant load and for a fixed sliding distance of 7.5 km. It was found that the wear rate of the alloys was greater for the heat treated specimens compared to the specimens that were tested in a cast and forged condition. Inspection of the alloys in both metallurgical conditions suggests that the wear phenomenon was characterized mostly by severe plastic deformation of the alloy matrix at both surface and subsurface regions by the well-known mechanism of plowing. The test specimens also experienced the formation of a tribofilm whose characteristics were different for each test condition. The formation of tribofilms also had a considerable influence on the wear behavior of the systems studied because they were also present on the surface of the counter rolls with this phenomenon being an additional wear mechanism experienced by the tribosystems studied.
Skip Nav Destination
Article navigation
April 2019
Research-Article
Influence of Heat Treatment on the Wear Behavior of a Haynes 282® Nickel-Based Superalloy
Javier H. Ramírez-Ramírez,
Javier H. Ramírez-Ramírez
Facultad de Ingeniería
Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n,
Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: Javier.rmz02@gmail.com
Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n,
Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: Javier.rmz02@gmail.com
Search for other works by this author on:
Juan Manuel Alvarado-Orozco,
Juan Manuel Alvarado-Orozco
Centro de Ingeniería y Desarrollo Industrial,
Av. Playa Pie de la
Cuesta No. 702. Desarrollo San Pablo,
Querétaro 66455, México
e-mail: juan.alvarado@cidesi.edu.mx
Av. Playa Pie de la
Cuesta No. 702. Desarrollo San Pablo,
Querétaro 66455, México
e-mail: juan.alvarado@cidesi.edu.mx
Search for other works by this author on:
Francisco A. Pérez-González,
Francisco A. Pérez-González
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: fco.aurelio.gzz@gmail.com
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: fco.aurelio.gzz@gmail.com
Search for other works by this author on:
Rafael Colás,
Rafael Colás
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza,
Nuevo León 66455, Mexico
e-mail: colas.rafael@gmail.com
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza,
Nuevo León 66455, Mexico
e-mail: colas.rafael@gmail.com
Search for other works by this author on:
Nelson F. Garza-Montes-de-Oca
Nelson F. Garza-Montes-de-Oca
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mails: nelson.garza@gmail.com;
nelson.garzamn@uanl.edu.mx
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mails: nelson.garza@gmail.com;
nelson.garzamn@uanl.edu.mx
Search for other works by this author on:
Javier H. Ramírez-Ramírez
Facultad de Ingeniería
Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n,
Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: Javier.rmz02@gmail.com
Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n,
Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: Javier.rmz02@gmail.com
Juan Manuel Alvarado-Orozco
Centro de Ingeniería y Desarrollo Industrial,
Av. Playa Pie de la
Cuesta No. 702. Desarrollo San Pablo,
Querétaro 66455, México
e-mail: juan.alvarado@cidesi.edu.mx
Av. Playa Pie de la
Cuesta No. 702. Desarrollo San Pablo,
Querétaro 66455, México
e-mail: juan.alvarado@cidesi.edu.mx
Francisco A. Pérez-González
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: fco.aurelio.gzz@gmail.com
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mail: fco.aurelio.gzz@gmail.com
Rafael Colás
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza,
Nuevo León 66455, Mexico
e-mail: colas.rafael@gmail.com
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza,
Nuevo León 66455, Mexico
e-mail: colas.rafael@gmail.com
Nelson F. Garza-Montes-de-Oca
Facultad de Ingeniería Mecánica y Eléctrica,
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mails: nelson.garza@gmail.com;
nelson.garzamn@uanl.edu.mx
Universidad Autónoma de Nuevo León,
Av. Universidad s/n, Ciudad Universitaria,
San Nicolás de los Garza 66455,
Nuevo León, Mexico
e-mails: nelson.garza@gmail.com;
nelson.garzamn@uanl.edu.mx
1Corresponding author.
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received August 14, 2018; final manuscript received December 7, 2018; published online January 25, 2019. Assoc. Editor: Xiaolei Wang.
J. Tribol. Apr 2019, 141(4): 041606 (12 pages)
Published Online: January 25, 2019
Article history
Received:
August 14, 2018
Revised:
December 7, 2018
Citation
Ramírez-Ramírez, J. H., Manuel Alvarado-Orozco, J., Pérez-González, F. A., Colás, R., and Garza-Montes-de-Oca, N. F. (January 25, 2019). "Influence of Heat Treatment on the Wear Behavior of a Haynes 282® Nickel-Based Superalloy." ASME. J. Tribol. April 2019; 141(4): 041606. https://doi.org/10.1115/1.4042274
Download citation file:
Get Email Alerts
Cited By
Flow Characteristics of Asymmetric Plunger Pairs in High-Pressure Plunger Pumps
J. Tribol (April 2025)
Related Articles
Wear Resistance of Super Alloys at Elevated Temperatures
J. Tribol (April,1998)
Effect of Heat Treatment and Electric Discharge Alloying on the Tribological Performance of Selective Laser Melted AlSi10Mg
J. Tribol (May,2021)
Options for Improving Performance of Additively Manufactured Nickel-Base Superalloys for Gas Turbine Applications
J. Eng. Gas Turbines Power (March,2024)
Advanced Braze Alloys for Fast Epitaxial High-Temperature Brazing of Single-Crystalline Nickel-Base Superalloys
J. Eng. Gas Turbines Power (March,2010)
Related Proceedings Papers
Related Chapters
Wear and Contact Fatigue Properties of a Novel Lubricant Additive
Bearing and Transmission Steels Technology
Relationship Between Tool Deterioration and Cutting Force During Milling of a Nickel-Based Superalloy Using Cemented Carbide Tool
Advances in Multidisciplinary Engineering
Advanced Microscopy and 3D Atom Probe on Irradiated BWR Structural Materials to Elucidate Hydrogen Pickup Mechanism
Zirconium in the Nuclear Industry: 20th International Symposium