Abstract
Traditional analysis of journal bearings assumed a constant viscosity which simplified the solutions for static and dynamic characteristics and responses. Today's high-performance machinery requires more accurate models wherein temperature and viscosity distributions in the film must be calculated. Thermal effects in journal bearings have a strong influence on both static and dynamic properties, and consequently play a critical role in determining rotor-bearing system performance. This paper presents an extensive survey of the thermal modeling methods and effects in journal bearings. The subjects include various bearing types, and recent progress in thermal bearing design and thermal instability problems observed in fluid and gas film hydrodynamic bearings. The extent of the survey ranges from conventional Reynolds equation models to more advanced computational fluid dynamics models.
References
1.
Knight
, J. D.
, and Niewiarowski
, A. J.
, 1990
, “Effects of Two Film Rupture Models on the Thermal Analysis of a Journal Bearing
,” ASME J. Tribol.
, 112
(2
), pp. 183
–188
. 10.1115/1.29202402.
Taniguchi
, S.
, Makino
, T.
, Takeshita
, K.
, and Ichimura
, T.
, 1990
, “A Thermohydrodynamic Analysis of Large Tilting-Pad Journal Bearing in Laminar and Turbulent Flow Regimes With Mixing
,” ASME J. Tribol.
, 112
(3
), pp. 542
–548
. 10.1115/1.29202913.
Knight
, J. D.
, and Ghadimi
, P.
, 1992
, “Effects of Modified Effective Length Models of the Rupture Zone on the Analysis of a Fluid Journal Bearing
,” STLE Tribol. Trans.
, 35
(1
), pp. 29
–36
. 10.1080/104020092089820854.
Simmons
, J. E. L.
, and Dixon
, S. J.
, 1994
, “Effect of Load Direction, Preload, Clearance Ratio and Oil Flow on the Performance of a 200mm Journal Pad Bearing
,” STLE Tribol. Trans.
, 37
(2
), pp. 227
–236
. 10.1080/104020094089832875.
Kim
, J.
, Palazzolo
, A. B.
, and Gadangi
, R. K.
, 1994
, “TEHD Analysis for Tilting Pad Journal Bearings Using Upwind Finite Element Method
,” Tribol. Trans.
, 37
(4
), pp. 771
–783
. 10.1080/104020094089833596.
Suh
, J.
, and Palazzolo
, A.
, 2015
, “Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part I: Theoretical Modeling
,” ASME J. Tribol.
, 137
(4
), p. 041703
. 10.1115/1.40300207.
Ettles
, C.
, 1969
, “Hot Oil Carry-Over in Thrust Bearings
,” Proc. Instin. Mech. Eng. Conf. Proc.
, 184
(12
), pp. 75
–81
. 10.1243/pime_conf_1969_184_373_028.
Mitsui
, J.
, Hori
, Y.
, and Tanaka
, M.
, 1983
, “Thermohydrodynamic Analysis of Cooling Effect of Supply Oil in Circular Journal Bearings
,” ASME J. Tribol.
, 105
(3
), pp. 414
–421
. 10.1115/1.32546299.
Kim
, J.
, Palazzolo
, A.
, and Gadangi
, R.
, 1995
, “Dynamic Characteristics of TEHD Tilt Pad Journal Bearing Simulation Including Multiple Mode Pad Flexibility Model
,” ASME J. Vib. Acoust.
, 117
(1
), pp. 123
–135
. 10.1115/1.287385610.
Gadangi
, R. K.
, and Palazzolo
, A. B.
, 1995
, “Transient Analysis of Tilt Pad Journal Bearings Including Effects of Pad Flexibility and Fluid Film Temperature
,” ASME J. Tribol.
, 117
(2
), pp. 302
–307
. 10.1115/1.283124711.
Desbordes
, H.
, Fillon
, M.
, Frêne
, J.
, and Chan Hew Wai
, C.
, 1995
, “The Effects of Three-Dimensional Pad Deformations on Tilting-Pad Journal Bearings Under Dynamic Loading
,” ASME J. Tribol.
, 117
(3
), pp. 379
–384
. 10.1115/1.283126212.
Fillon
, M.
, Desbordes
, H.
, Frêne
, J.
, and Chan Hew Wai
, C.
, 1996
, “A Global Approach of Thermal Effects Including Pad Deformations in Tilting-Pad Journal Bearings Submitted to Unbalance Load
,” ASME J. Tribol.
, 118
(1
), pp. 169
–174
. 10.1115/1.283707413.
Gadangi
, R. K.
, Palazzolo
, A. B.
, and Kim
, J.
, 1996
, “Transient Analysis of Plain and Tilt Pad Journal Bearings Including Fluid Film Temperature Effects
,” ASME J. Tribol.
, 118
(2
), pp. 423
–430
. 10.1115/1.283131914.
Monmousseau
, P.
, and Fillon
, M.
, 1999
, “Frequency Effects on the TEHD Behavior of a Tilting-Pad Journal Bearing Under Dynamic Loading
,” ASME J. Tribol.
, 121
(2
), pp. 321
–326
. 10.1115/1.283393915.
Gandjalikhan Nassab
, S. A.
, and Maoyeri
, M. S.
, 2002
, “Three-dimensional Thermohydrodynamic Analysis of Axially Grooved Journal Bearings
,” Proc. Inst. Mech. Eng., Part J
, 216
(1
), pp. 35
–47
. 10.1243/135065002154387016.
Nicholas
, J. C.
, 2003
, “Tilting Pad Bearings With Spray-Bar Blockers and By-Pass Cooling for High Speed, High Load Applications
,” Proceedings of 32rd Turbomachinery Symposium
, Texas A&M University
, pp. 27
–37
.17.
He
, M.
, Allaire
, P.
, Cloud
, C. H.
, and Nicholas
, J.
, 2004
, “A Pressure Dam Bearing Analysis With Adiabatic Thermal Effects
,” Tribol. Trans.
, 47
(1
), pp. 70
–76
. 10.1080/0569819049027900118.
Fatu
, A.
, Hajjam
, M.
, and Bonneau
, D.
, 2005
, “A New Model of Thermoelastohydrodynamic Lubrication in Dynamically Loaded Journal Bearings
,” ASME J. Tribol.
, 128
(1
), pp. 85
–95
. 10.1115/1.211493219.
Brito
, F. P.
, Miranda
, A. S.
, Bouyer
, J.
, and Fillon
, M.
, 2006
, “Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two-Axial Groove Hydrodynamic Journal Bearing
,” ASME J. Tribol.
, 129
(1
), pp. 98
–105
. 10.1115/1.240120620.
Liu
, D.
, Zhang
, W.
, and Zheng
, T.
, 2007
, “A Simplified One-Dimensional Thermal Model for Journal Bearings
,” ASME J. Tribol.
, 130
(1
), p. 011003
. 10.1115/1.280542721.
Sim
, K.
, and Kim
, D.
, 2008
, “Thermohydrodynamic Analysis of Compliant Flexure Pivot Tilting Pad Gas Bearings
,” ASME J. Eng. Gas Turbines Power
, 130
(3
), p. 032502
. 10.1115/1.283661622.
Bang
, K. B.
, Kim
, J. H.
, and Cho
, Y. J.
, 2010
, “Comparison of Power Loss and Pad Temperature for Leading Edge Groove Tilting Pad Journal Bearings and Conventional Tilting Pad Journal Bearings
,” Tribol. Int.
, 43
(8
), pp. 1287
–1293
. 10.1016/j.triboint.2009.12.00223.
Chauhan
, A.
, Sehgal
, R.
, and Sharma
, R. K.
, 2011
, “Investigations on the Thermal Effects in Non-Circular Journal Bearings
,” Tribol. Int.
, 44
(12
), pp. 1765
–1773
. 10.1016/j.triboint.2011.06.02824.
Solghar
, A. A.
, Brito
, F. P.
, Claro
, J. C. P.
, and Nassab
, S. A. G.
, 2011
, “An Experimental Study of the Influence of Loading Direction on the Thermohydrodynamic Behavior of Twin Axial Grooves Journal Bearings
,” J. Eng. Tribol.
, 225
(5
), pp. 245
–254
. 10.1177/135065011140197025.
Thorat
, M. R.
, Pettinato
, B. C.
, and De Choudhury
, P.
, 2014
, “Metal Temperature Correlations in Tilting Pad Journal Bearings
,” ASME J. Eng. Gas Turbines Power
, 136
(11
), p. 112503
. 10.1115/1.402741626.
Tschoepe
, D. P.
, and Childs
, D. W.
, 2014
, “Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-Pad, Rocker-Pivot, Tilting-Pad Journal Bearing
,” ASME J. Eng. Gas Turbines Power
, 136
(5
), p. 052501
. 10.1115/1.402630127.
Suh
, J.
, and Palazzolo
, A.
, 2015
, “Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part II: Parametric Studies
,” ASME J. Tribol.
, 137
(4
), p. 041704
. 10.1115/1.403002128.
Zhang
, F.
, Ouyang
, W.
, Hong
, H.
, Guan
, Y.
, Yuan
, X.
, and Dong
, G.
, 2015
, “Experimental Study on Pad Temperature and Film Thickness of Tilting-Pad Journal Bearings With an Elastic-Pivot Pad
,” Tribol. Int.
, 88
, pp. 228
–235
. 10.1016/j.triboint.2015.03.03029.
Kuznetsov
, E.
, and Glavatskih
, S.
, 2016
, “Dynamic Characteristics of Compliant Journal Bearings Considering Thermal Effects
,” Tribol. Int.
, 94
, pp. 288
–305
. 10.1016/j.triboint.2015.08.01830.
Li
, H.
, Yin
, Z.
, and Wang
, Y.
, 2019
, “Study on the Performance of Journal Bearings in Different Lubricants by CFD and FSI Method With Thermal Effect and Cavitation
,” MATEC Web of Conferences
, Orlando, FL
, Oct. 13–15, 2018
.31.
Mo
, J.
, Gu
, C.
, Pan
, X.
, Zheng
, S.
, and Ying
, G.
, 2017
, “A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method
,” ASME J. Tribol.
, 140
(1
), p. 011102
. 10.1115/1.403683532.
Nichols
, B. R.
, Fittro
, R. L.
, and Goyne
, C. P.
, 2018
, “Steady-State Tilting-Pad Bearing Performance Under Reduced Oil Supply Flow Rates
,” ASME J. Tribol.
, 140
(5
), p. 051701
. 10.1115/1.403940833.
Bouyer
, J.
, Fillon
, M.
, Helene
, M.
, Beaurain
, J.
, and Giraudeau
, C.
, 2018
, “Behavior of a Two-Lobe Journal Bearing With a Scratched Shaft: Comparison Between Theory and Experiment
,” ASME J. Tribol.
, 141
(2
), p. 021702
. 10.1115/1.404136334.
Bouyer
, J.
, and Fillon
, M.
, 2001
, “An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances
,” ASME J. Tribol.
, 124
(2
), pp. 313
–319
. 10.1115/1.140218035.
El-Butch
, A. M.
, and Ashour
, N. M.
, 2005
, “Transient Analysis of Misaligned Elastic Tilting Pad Journal Bearing
,” Tribol. Int.
, 38
(1
), pp. 41
–48
. 10.1016/j.triboint.2004.05.00836.
Jang
, J. Y.
, and Khonsari
, M. M.
, 2009
, “On the Behavior of Misaligned Journal Bearings Based on Mass-Conservative Thermohydrodynamic Analysis
,” ASME J. Tribol.
, 132
(1
), p. 011702
. 10.1115/1.400028037.
Sun
, J.
, Deng
, M.
, Fu
, Y.
, and Gui
, C.
, 2009
, “Thermohydrodynamic Lubrication Analysis of Misaligned Plain Journal Bearing With Rough Surface
,” ASME J. Tribol.
, 132
(1
), p. 011704
. 10.1115/1.400051538.
Suh
, J.
, and Choi
, Y.-S.
, 2016
, “Pivot Design and Angular Misalignment Effects on Tilting Pad Journal Bearing Characteristics: Four Pads for Load on Pad Configuration
,” Tribol. Int.
, 102
, pp. 580
–599
. 10.1016/j.triboint.2016.05.04939.
Yang
, P.
, Yuan
, Q.
, and Chen
, R.
, 2018
, “Experimental Research on the Tilting Pad Bearing Under the High Temperature of Inlet Oil
,” Ind. Lubr. Tribol.
, 70
(6
), pp. 935
–941
. 10.1108/ILT-01-2017-002140.
Abdollahi
, B.
, and San Andrés
, L.
, 2018
, “Improved Estimation of Bearing Pads’ Inlet Temperature: A Model for Lubricant Mixing at Oil Feed Ports and Validation Against Test Data
,” ASME J. Tribol.
, 141
(3
), p. 031703
. 10.1115/1.404172041.
Hagemann
, T.
, and Schwarze
, H.
, 2018
, “A Model for Oil Flow and Fluid Temperature Inlet Mixing in Hydrodynamic Journal Bearings
,” ASME J. Tribol.
, 141
(2
), p. 021701
. 10.1115/1.404121142.
Hagemann
, T.
, Zeh
, C.
, and Schwarze
, H.
, 2019
, “Heat Convection Coefficients of a Tilting-pad Journal Bearing With Directed Lubrication
,” Tribol. Int.
, 136
, pp. 114
–126
. 10.1016/j.triboint.2019.03.03543.
Yang
, J.
, and Palazzolo
, A.
, 2019
, “Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing—Part I: Static Response
,” ASME J. Tribol.
, 141
(6
), p. 061702
. 10.1115/1.404334944.
Yang
, J.
, and Palazzolo
, A.
, 2019
, “Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing—Part II: Dynamic Response
,” ASME J. Tribol.
, 141
(6
), p. 061703
. 10.1115/1.404335045.
Morton
, P. G.
, 1975
, “Some Aspects of Thermal Instability in Generators
,” G.E.C. Internal Report No. S/W40 u183.46.
Hesseborn
, B.
, 1978
, “Measurements of Temperature Unsymmetries in Bearing Journal Due to Vibration
,” Internal Report ABB Stal.47.
Dimarogonas
, A.
, 1974
, “A Study of the Newkirk Effect in Turbomachinery
,” Wear
, 28
(3
), pp. 369
–382
. 10.1016/0043-1648(74)90193-848.
Kellenberger
, W.
, 1980
, “Spiral Vibrations Due to the Seal Rings in Turbogenerators Thermally Induced Interaction Between Rotor and Stator
,” ASME J. Mech. Des.
, 102
(1
), pp. 177
–184
. 10.1115/1.325471049.
Newkirk
, B.
, 1927
, “Shaft Rubbing
,” J. Am. Soc. Nav. Eng.
, 39
(1
), pp. 114
–120
. 10.1111/j.1559-3584.1927.tb04982.x50.
Schmied
, J.
, 1987
, “Spiral Vibrations of Rotors,” Rotating Machinery Dynamics
, A.
Muszynska
, and J. C.
Simonis
, eds., Vol. 2
, ASME
, New York
.51.
Standard
, A.
, 2005
, Tutorial on Rotordynamics: Lateral Critical, Unbalance Response, Stability, Train Torsional and Rotor Balancing
, 2nd ed., American Petroleum Institute
, Washington, DC
, 684
.52.
de Jongh
, F.
, 2008
, “The Synchronous Rotor Instability Phenomenon—Morton Effect
,” 37th Turbomachinery Symposium
, Houston, TX
, Sept. 8–11
, pp. 159
–167
.53.
Gu
, L.
, 2018
, “A Review of Morton Effect: From Theory to Industrial Practice
,” Tribol. Trans.
, 61
(2
), pp. 381
–391
. 10.1080/10402004.2017.133366354.
Tong
, X.
, Palazzolo
, A.
, and Suh
, J.
, 2017
, “A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect
,” ASME Appl. Mech. Rev.
, 69
(6
), p. 060801
. 10.1115/1.403721655.
de Jongh
, F.
, and Van Der Hoeven
, P.
, 1998
, “Application of a Heat Barrier Sleeve to Prevent Synchronous Rotor Instability
,” 27th Turbomachinery Symposium
, Houston, TX
, Sept. 20–24
, pp. 17
–26
.56.
Schmied
, J.
, Pozivil
, J.
, and Walch
, J.
, 2008
, “Hot Spots in Turboexpander Bearings: Case History, Stability Analysis, Measurements and Operational Experience
,” ASME
Paper No. GT2008-51179
. 10.1115/gt2008-5117957.
Marscher
, W.
, and Illis
, B.
, 2007
, “Journal Bearing Morton Effect Cause of Cyclic Vibration in Compressors
,” Tribol. Trans.
, 50
(1
), pp. 104
–113
. 10.1080/1040200060114778158.
Berot
, F.
, and Dourlens
, H.
, 1999
, “On Instability of Overhung Centrifugal Compressors
,” ASME Paper No. 99-GT-202
.59.
de Jongh
, F.
, and Morton
, P.
, 1994
, “The Synchronous Instability of a Compressor Rotor Due to Bearing Journal Differential Heating
,” ASME
Paper No. 94-GT-035
. 10.1115/94-gt-03560.
Kocur
, J.
, and de Jongh
, F.
, 2000
, “Thermal Rotor Instability in Gas Compressors
,” 14th International Gas Convention
, Caracas, Venezuela
, May 10–12
, pp. 1
–14
.61.
Corcoran
, J.
, Rea
, H.
, Cornejo
, G.
, and Leonhard
, M.
, 1997
, “Discovering, the Hard Way, How a High Performance Coupling Influenced the Critical Speeds and Bearing Loading of an Overhung Radial Compressor—A Case History
,” 26th Turbomachinery Symposium
, Houston, TX
, Sept.
, pp. 67
–78
.62.
Kirk
, G.
, Guo
, Z.
, and Balbahadur
, A.
, 2003
, “Synchronous Thermal Instability Prediction for Overhung Rotors
,” 32nd Turbomachinery Symposium
, Houston, TX
, Sept. 8–11
, pp. 121
–135
.63.
Kirk
, G.
, and Guo
, Z.
, 2013
, “Design Tool for Prediction of Thermal Synchronous Instability
,” ASME Paper No. DETC2013-12966
.64.
Tong
, X.
, and Palazzolo
, A.
, 2016
, “Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability—Morton Effect—Part I: Theory and Modeling Approach
,” ASME J. Tribol.
, 139
(1
), p. 011705
. 10.1115/1.403388865.
Childs
, D.
, and Saha
, R.
, 2012
, “A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect
,” ASME J. Eng. Gas Turbines Power
, 134
(7
), p. 072501
. 10.1115/1.400597366.
Faulkner
, H.
, Strong
, W.
, and Kirk
, R.
, 1997
, “Thermally Induced Synchronous Instability of a Radial Inflow Overhung Turbine—Part II
,” ASME Design Engineering Technical Conference
, Sacramento, CA
, Sept. 14–17
, Paper No. DETC97/VIB-4174
.67.
Lorenz
, J.
, and Murphy
, B.
, 2011
, “Case Study of Morton Effect Shaft Differential Heating in a Variable-Speed Rotating Electric Machine
,” ASME
Paper No. GT2011-45228
. 10.1115/gt2011-4522868.
Suh
, J.
, and Palazzolo
, A.
, 2014
, “Three-Dimensional Thermohydrodynamic Morton Effect Analysis—Part II: Parametric Studies
,” ASME J. Tribol.
, 136
(3
), p. 031707
. 10.1115/1.402731069.
Balbahadur
, A.
, 2001
, “A Thermoelastohydrodynamic Model of the Morton Effect Operating in Overhung Rotors Supported by Plain or Tilting Pad Journal Bearings
,” Ph.D. thesis
, Virginia Tech
, Blacksburg, VA
.70.
Panara
, D.
, Panconi
, S.
, and Griffini
, D.
, 2015
, “Numerical Prediction and Experimental Validation of Rotor Thermal Instability
,” 44th Turbomachinery Symposium
, Houston, TX
, Sept. 14–17
.71.
Tong
, X.
, and Palazzolo
, A.
, 2017
, “Measurement and Prediction of the Journal Circumferential Temperature Distribution for the Rotordynamic Morton Effect
,” ASME J. Tribol.
, 140
(3
), p. 031702
. 10.1115/1.403810472.
Keogh
, P.
, and Morton
, P.
, 1993
, “Journal Bearing Differential Heating Evaluation With Influence on Rotor Dynamic Behaviour
,” Proc. R. Soc. London, Ser. A
, 441
(1913
), pp. 527
–548
. 10.1098/rspa.1993.007773.
Keogh
, P.
, and Morton
, P.
, 1994
, “The Dynamic Nature of Rotor Thermal Bending Due to Unsteady Lubricant Shearing Within a Bearing
,” Proc. R. Soc. London, Ser. A
, 445
(1924
), pp. 273
–290
. 10.1098/rspa.1994.006174.
Larsson
, B.
, 1999
, “Journal Asymmetric Heating—Part I: Nonstationary Bow
,” ASME J. Tribol.
, 121
(1
), pp. 157
–163
. 10.1115/1.283379775.
Larsson
, B.
, 1999
, “Journal Asymmetric Heating—Part II: Alteration of Rotor Dynamic Properties
,” ASME J. Tribol.
, 121
(1
), pp. 164
–168
. 10.1115/1.283379876.
Tucker
, P.
, and Keogh
, P.
, 1996
, “On the Dynamic Thermal State in a Hydrodynamic Bearing With a Whirling Journal Using CFD Techniques
,” ASME J. Tribol.
, 118
(2
), pp. 356
–363
. 10.1115/1.283130977.
Gomiciaga
, R.
, and Keogh
, P.
, 1999
, “Orbit Induced Journal Temperature Variation in Hydrodynamic Bearings
,” ASME J. Tribol.
, 121
(1
), pp. 77
–84
. 10.1115/1.283381478.
Murphy
, B.
, and Lorenz
, J.
, 2010
, “Simplified Morton Effect Analysis for Synchronous Spiral Instability
,” ASME J. Vib. Acoust.
, 132
(5
), p. 051008
. 10.1115/1.400151279.
Lee
, J.
, and Palazzolo
, A.
, 2012
, “Morton Effect Cyclic Vibration Amplitude Determination for Tilt Pad Bearing Supported Machinery
,” ASME J. Tribol.
, 135
(1
), p. 011701
. 10.1115/1.400788480.
Grigor’ev
, B. S.
, Fedorov
, A. E.
, and Schmied
, J.
, 2015
, “New Mathematical Model for the Morton Effect Based on the THD Analysis
,” Nineth IFToMM International Conference on Rotor Dynamics
, Milan, Italy
, Sept. 22–25
, pp. 2243
–2253
.81.
Tong
, X.
, Palazzolo
, A.
, and Suh
, J.
, 2016
, “Rotordynamic Morton Effect Simulation With Transient, Thermal Shaft Bow
,” ASME J. Tribol.
, 138
(3
), p. 031705
. 10.1115/1.403296182.
Tong
, X.
, and Palazzolo
, A.
, 2016
, “Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability—Morton Effect—Part II: Occurrence and Prevention
,” ASME J. Tribol.
, 139
(1
), p. 011706
. 10.1115/1.403389283.
Tong
, X.
, and Palazzolo
, A.
, 2018
, “Tilting Pad Gas Bearing Induced Thermal Bow-Rotor Instability
,” Tribol. Int.
, 121
, pp. 269
–279
. 10.1016/j.triboint.2018.01.06684.
Khonsari
, M.
, and Beaman
, J.
, 1986
, “Thermohydrodynamic Analysis of Laminar Incompressible Journal Bearings
,” ASLE Trans.
, 29
(2
), pp. 141
–150
. 10.1080/0569819860898167185.
Knight
, J. D.
, and Barrett
, L. E.
, 1988
, “Analysis of Tilting Pad Journal Bearings With Heat Transfer Effects
,” ASME J. Tribol.
, 110
(1
), pp. 128
–133
. 10.1115/1.326155086.
Fillon
, M.
, Bligoud
, J.
, and Frêne
, J.
, 1992
, “Experimental Study of Tilting-Pad Journal Bearings—Comparison With Theoretical Thermoelastohydrodynamic Results
,” ASME J. Tribol.
, 114
(3
), pp. 579
–587
. 10.1115/1.292092087.
He
, M.
, Allaire
, P.
, Barrett
, L.
, and Nicholas
, J.
, 2005
, “Thermohydrodynamic Modeling of Leading-Edge Groove Bearings Under Starvation Condition
,” Tribol. Trans.
, 48
(3
), pp. 362
–369
. 10.1080/0569819059100853188.
Suh
, J.
, and Palazzolo
, A.
, 2014
, “Three-Dimensional Thermohydrodynamic Morton Effect Simulation—Part I: Theoretical Model
,” ASME J. Tribol.
, 136
(3
), p. 031706
. 10.1115/1.402730989.
San Andrés
, L.
, Ryu
, K.
, and Kim
, T. H.
, 2010
, “Identification of Structural Stiffness and Energy Dissipation Parameters in a Second Generation Foil Bearing: Effect of Shaft Temperature
,” ASME J. Eng. Gas Turbines Power
, 133
(3
), p. 032501
. 10.1115/1.400231790.
Salehi
, M.
, and Heshmat
, H.
, 2000
, “On the Fluid Flow and Thermal Analysis of a Compliant Surface Foil Bearing and Seal
,” Tribol. Trans.
, 432
(2
), pp. 318
–324
. 10.1080/1040200000898234691.
Salehi
, M.
, Swanson
, E.
, and Heshmat
, H.
, 2000
, “Thermal Features of Compliant Foil Bearings—Theory and Experiments
,” ASME J. Tribol.
, 123
(3
), pp. 566
–571
. 10.1115/1.130803892.
Kim
, T. H.
, and San Andrés
, L.
, 2009
, “Thermohydrodynamic Model Predictions and Performance Measurements of Bump-Type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems
,” ASME J. Tribol.
, 132
(1
), p. 011701
. 10.1115/1.400027993.
Peng
, Z.
, and Khonsari
, M. M.
, 2006
, “A Thermohydrodynamic Analysis of Foil Journal Bearings
,” ASME J. Tribol.
, 128
(3
), pp. 534
–541
. 10.1115/1.219752694.
Lee
, D.
, and Kim
, D.
, 2010
, “Thermohydrodynamic Analyses of Bump Air Foil Bearings With Detailed Thermal Model of Foil Structures and Rotor
,” ASME J. Tribol.
, 132
(2
), p. 021704
. 10.1115/1.400101495.
Sim
, K.
, and Kim
, T. H.
, 2012
, “Thermohydrodynamic Analysis of Bump-Type Gas Foil Bearings Using Bump Thermal Contact and Inlet Flow Mixing Models
,” Tribol. Int.
, 48
, pp. 137
–148
. 10.1016/j.triboint.2011.11.01796.
Gita
, T.
, and Carpino
, M.
, 2011
, “Thermal Structural Effects in a Gas-Lubricated Foil Journal Bearing
,” Tribol. Trans.
, 54
(5
), pp. 701
–713
. 10.1080/10402004.2011.59311297.
Lehn
, A.
, Mahner
, M.
, and Schweizer
, B.
, 2017
, “A Contribution to the Thermal Modeling of Bump Type Air Foil Bearings: Analysis of the Thermal Resistance of Bump Foils
,” ASME J. Tribol.
, 139
(6
), p. 061702
. 10.1115/1.403663198.
Paouris
, L. I.
, Bompos
, D. A.
, and Nikolakopoulos
, P. G.
, 2013
, “Simulation of Static Performance of Air Foil Bearings Using Coupled Finite Element and Computational Fluid Dynamics Techniques
,” ASME J. Eng. Gas Turbines Power
, 136
(2
), p. 022503
. 10.1115/1.402553799.
Aksoy
, S.
, and Aksit
, M. F.
, 2015
, “A Fully Coupled 3D Thermo-Elastohydrodynamics Model for a Bump-Type Compliant Foil Journal Bearing
,” Tribol. Int.
, 82
, pp. 110
–122
. 10.1016/j.triboint.2014.10.001100.
Lee
, D.
, and Kim
, D.
, 2011
, “Three-Dimensional Thermohydrodynamic Analyses of Rayleigh Step Air Foil Thrust Bearing With Radially Arranged Bump Foils
,” Tribol. Trans.
, 54
(3
), pp. 432
–448
. 10.1080/10402004.2011.556314101.
Gad
, A. M.
, and Kaneko
, S.
, 2015
, “Tailoring of the Bearing Stiffness to Enhance the Performance of Gas-Lubricated Bump-Type Foil Thrust Bearing
,” Proc. Inst. Mech. Eng., Part J
, 230
(5
), pp. 541
–560
. 10.1177/1350650115606482102.
Lehn
, A.
, Mahner
, M.
, and Schweizer
, B.
, 2018
, “A Thermo-Elasto-Hydrodynamic Model for Air Foil Thrust Bearings Including Self-Induced Convective Cooling of the Rotor Disk and Thermal Runaway
,” Tribol. Int.
, 119
, pp. 281
–298
. 10.1016/j.triboint.2017.08.015103.
Qin
, K.
, Peter
, A. J.
, Joshua
, A. K.
, Li
, D.
, and Jahn
, I.
, 2018
, “A Fluid-Structure-Thermal Model for Bump-Type Foil Thrust Bearings
,” Tribol. Int.
, 121
, pp. 481
–491
. 10.1016/j.triboint.2018.02.008104.
Feng
, K.
, Li
, W.
, Deng
, Z.
, and Zhang
, M.
, 2017
, “Thermohydrodynamic Analysis and Thermal Management of Spherical Spiral Groove gas Bearings
,” Tribol. Trans.
, 60
(4
), pp. 629
–644
. 10.1080/10402004.2016.1195467105.
Zhang
, K.
, Zhao
, X.
, Feng
, K.
, and Zhao
, Z.
, 2018
, “Thermohydrodynamic Analysis and Thermal Management of Hybrid Bump–Metal Mesh Foil Bearings: Experimental Tests and Theoretical Predictions
,” Int. J. Therm. Sci.
, 127
, pp. 91
–104
. 10.1016/j.ijthermalsci.2018.01.018106.
Feng
, K.
, and Kaneko
, S.
, 2009
, “Thermohydrodynamic Study of Multiwound Foil Bearing Using Lobatto Point Quadrature
,” ASME J. Tribol.
, 131
(2
), p. 021702
. 10.1115/1.3070579107.
Kim
, D.
, 2015
, “Design Space of Foil Bearings for Closed-Loop Supercritical CO2 Power Cycles Based on Three-Dimensional Thermohydrodynamic Analyses
,” ASME J. Eng. Gas Turbines Power
, 138
(3
), p. 032504
. 10.1115/1.4031433108.
Chien
, S.-Y.
, Cramer
, M.
, and Untaroiu
, A.
, 2017
, “A Compressible Thermohydrodynamic Analysis of Journal Bearings Lubricated With Supercritical CO2
,” Proceedings of the ASME 2017 Fluids Engineering Division Summer Meeting. Volume 1B, Symposia: Fluid Measurement and Instrumentation; Fluid Dynamics of Wind Energy; Renewable and Sustainable Energy Conversion; Energy and Process Engineering; Microfluidics and Nanofluidics; Development and Applications in Computational Fluid Dynamics; DNS/LES and Hybrid RANS/LES Methods
, Waikoloa, HI
, July 30–Aug. 3
, p. V01BT09A001
.109.
Lee
, D.
, Kim
, D.
, and Sadashiva
, R. P.
, 2011
, “Transient Thermal Behavior of Preloaded Three-Pad Foil Bearings: Modeling and Experiments
,” ASME J. Tribol.
, 133
(2
), p. 021703
. 10.1115/1.4003561110.
Samanta
, P.
, and Khonsari
, M. M.
, 2018
, “On the Thermoelastic Instability of Foil Bearings
,” Tribol. Int.
, 121
, pp. 10
–20
. 10.1016/j.triboint.2018.01.014111.
DellaCorte
, C.
, 1998
, “A New Foil Air Bearing Test Rig for Use to 700 °C and 70,000 rpm
,” STLE Tribol. Trans.
, 41
(3
), pp. 335
–340
. 10.1080/10402009808983756112.
DellaCorte
, C.
, Valco
, M. J.
, Radil
, K. C.
, Heshmat
, H.
, and Lukaszewicz
, V. L.
, 2000
, “Performance and Durability of High Temperature Foil Air Bearings for Oil-Free Turbomachinery
,” Tribol. Trans.
, 43
(4
), pp. 774
–780
. 10.1080/10402000008982407113.
Radil
, K.
, and Zeszotek
, M.
, 2004
, “An Experimental Investigation Into the Temperature Profile of a Compliant Foil Air Bearing
,” Tribol. Trans.
, 47
(4
), pp. 470
–479
. 10.1080/05698190490501995114.
Zywica
, G.
, Baginski
, P.
, and Banaszek
, S.
, 2015
, “Experimental Studies on Foil Bearing With a Sliding Coating Made of Synthetic Material
,” ASME J. Tribol.
, 138
(1
), p. 011301
. 10.1115/1.4031396115.
Abraham Chirathadam
, T.
, and San Andrés
, L.
, 2013
, “Measurements of Rotordynamic Response and Temperatures in a Rotor Supported on Metal Mesh Foil Bearings
,” ASME J. Eng. Gas Turbines Power
, 135
(12
), p. 122507
. 10.1115/1.4025237116.
Howard
, S. A.
, DellaCorte
, C.
, Valco
, M. J.
, Prahl
, J. M.
, and Heshmat
, H.
, 2001
, “Steady-State Stiffness of Foil Air Journal Bearings at Elevated Temperatures
,” Tribol. Trans.
, 44
(3
), pp. 489
–493
. 10.1080/10402000108982486117.
Howard
, S.
, DellaCorte
, C.
, Valco
, M. J.
, Prahl
, J. M.
, and Heshmat
, H.
, 2001
, “Dynamic Stiffness and Damping Characteristics of a High-Temperature Air Foil Journal Bearing
,” Tribol. Trans.
, 44
(4
), pp. 657
–663
. 10.1080/10402000108982507118.
Kim
, T. H.
, Breedlove
, A. W.
, and San Andrés
, L.
, 2009
, “Characterization of a Foil Bearing Structure at Increasing Temperatures: Static Load and Dynamic Force Performance
,” ASME J. Tribol.
, 131
(4
), p. 041703
. 10.1115/1.3195042119.
Dykas
, B.
, and Howard
, S. A.
, 2004
, “Journal Design Considerations for Turbomachine Shafts Supported on Foil Air Bearings
,” STLE Tribol. Trans.
, 47
(4
), pp. 508
–516
. 10.1080/05698190490493391120.
Ryu
, K.
, and Andrés
, L. S.
, 2012
, “Effect of Cooling Flow on the Operation of a Hot Rotor-Gas Foil Bearing System
,” ASME J. Eng. Gas Turbines Power
, 134
(10
), p. 102511
. 10.1115/1.4007067121.
Żywica
, G.
, Bagiński
, P.
, and Kiciński
, J.
, 2017
, “Selected Operational Problems of High-Speed Rotors Supported by Gas Foil Bearings
,” Technische Mechanik
, 37
(2–5
), pp. 339
–346
. https://doi.org/10.24352/UB.OVGU-2017-109122.
Radil
, K.
, Howard
, S.
, and Dykas
, B.
, 2002
, “The Role of Radial Clearance on the Performance of Foil Air Bearings
,” STLE Tribol. Trans.
, 454
(4
), pp. 485
–490
. 10.1080/10402000208982578123.
Radil
, K.
, DellaCorte
, C.
, and Zeszotek
, M.
, 2007
, “Thermal Management Techniques for Oil-Free Turbomachinery Systems
,” STLE Tribol. Trans.
, 50
(3
), pp. 319
–327
. 10.1080/10402000701413497124.
Radil
, K. C.
, and DellaCorte
, C.
, 2009
, “A Three-Dimensional Foil Bearing Performance Map Applied to Oil-Free Turbomachinery
,” Tribol. Trans.
, 53
(5
), pp. 771
–778
. 10.1080/10402001003797942125.
Ryu
, K.
, and San Andrés
, L.
, 2013
, “On the Failure of a Gas Foil Bearing: High Temperature Operation Without Cooling Flow
,” ASME J. Eng. Gas Turbines Power
, 135
(11
), p. 112506
. 10.1115/1.4025079126.
Sim
, K.
, Lee
, Y.
, Song
, J.
, and Kim
, T.
, 2018
, “Effect of Cooling Flow on Thermal Performance of a Gas Foil Bearing Floating on a Hot Rotor
,” J. Mech. Sci. Technol.
, 32
(5
), pp. 1939
–1954
. 10.1007/s12206-018-0401-8127.
Guo
, Z.
, Toshio
, H.
, and Gorden
, R.
, 2005
, “Application of CFD Analysis for Rotating Machinery Part 1: Hydrodynamic, Hydrostatic Bearings and Squeeze Film Damper
,” ASME J. Eng. Gas Turbines Power
, 4
(2
), pp. 445
–451
. 10.1115/1.1807415128.
Uhkoetter
, S.
, aus der Wiesche
, S.
, Kursch
, M.
, and Beck
, C.
, 2012
, “Development and Validation of a Three-Dimensional Multiphase Flow CFD Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines
,” Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Volume 7: Structures and Dynamics, Parts A and B
, Copenhagen, Denmark
. June 11–15
, pp. 749
–758
.129.
Hagemann
, T.
, Zeh
, C.
, Pr€olß
, M.
, and Schwarze
, H.
, 2017
, “The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings
,” Int. J. Rotating Mach.
, 2017
, pp. 1
–12
. 10.1155/2017/5683763130.
Hagemann
, T.
, Pfeiffer
, P.
, and Schwarze
, H.
, 2018
, “Measured and Predicted Operating Characteristics of a Tilting-Pad Journal Bearing With Jacking-Oil Device at Hydrostatic, Hybrid, and Hydrodynamic Operation
,” Lubricants
, 6
(3
), p. 81
. 10.3390/lubricants6030081131.
Ding
, A.
, Ren
, X.
, Li
, X.
, and Gu
, C.
, 2018
, “Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing
,” Adv. Tribol.
, 2018
, p. 1
–14
. 10.1155/2018/2841303132.
Heshmat
, H.
, and Pinkus
, O.
, 1989
, “Workshop on Thermal Aspects of Fluid Film Lubrication—A Summary
,” ASME J. Tribol.
, 111
(4
), pp. 567
–568
. 10.1115/1.3261978133.
Tucker
, P.
, and Keogh
, P.
, 1994
, “A Generalized Computational Fluid Dynamics Approach for Journal Bearing Performance Prediction
,” Proc. Inst. Mech. Eng., Part J
, 209
(2
), pp. 99
–108
. 10.1243/PIME_PROC_1995_209_412_02134.
Shenoy
, B. S.
, Pai
, R. S.
, Rao
, D. S.
, and Pai
, R.
, 2009
, “Elasto-Hydrodynamic Lubrication Analysis of Full 360° Journal Bearing Using CFD and FSI Techniques
,” World J. Model. Simul.
, 5
(4
), pp. 315
–320
.135.
Li
, Q.
, Liu
, S.
, Pan
, X.
, and Zheng
, S.
, 2012
, “A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Systems
,” J. Zhejiang Univ., Sci., A
, 13
(4
), pp. 293
–310
. 10.1631/jzus.A1100228136.
Lin
, Q.
, Wei
, Z.
, Wang
, N.
, and Chen
, W.
, 2013
, “Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid-Structure Interaction Considering Thermal Influence and Cavitation
,” Tribol. Int.
, 64
, pp. 8
–15
. 10.1016/j.triboint.2013.03.001137.
Song
, Y.
, and Gu
, C.
, 2015
, “Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer
,” ASME J. Eng. Gas Turbines Power
, 137
(12
), p. 122502
. 10.1115/1.4030633138.
Edney
, L. E.
, Heitland
, G. B.
, and Decalmillo
, S. M.
, 1998
, “Testing, Analysis, and CFD Modeling of a Profiled Leading Edge Groove Tilting Pad Journal Bearing
,” 1998 ASME TURBO EXPO Conference
, Stockholm, Sweden
, June 2–5
, ASME
Paper No. 98-GT-409
. 10.1115/98-gt-409139.
Armentrout
, R. W.
, He
, M.
, Haykin
, T.
, and Reed
, A.
, 2017
, “Analysis of Turbulence and Convective Inertia in a Water-Lubricated Tilting-Lubricated Tilting-Pad Journal Bearing Using Conventional and CFD Approaches
,” Tribol. Trans.
, 60
(6
), pp. 1129
–1147
. 10.1080/10402004.2016.1251668140.
Hagemann
, T.
, and Schwarze
, H.
, 2019
, “Theoretical and Experimental Analyses of Directly Lubricated Tilting-Pad Journal Bearings With Leading Edge Groove
,” ASME J. Eng. Gas Turbines Power
, 141
(5
), p. 051010
. 10.1115/1.4041026141.
Ding
, A.
, Ren
, X.
, Li
, X.
, and Gu
, C.
, 2018
, “Friction Power Analysis and Improvement for a Tilting-Pad Journal Bearing Considering Air Entrainment
,” Appl. Therm. Eng.
, 145
(25
), pp. 763
–771
. 10.1016/j.applthermaleng.2018.09.080142.
Li
, M.
, Gu
, C.
, Pan
, X.
, Zheng
, S.
, and Li
, Q.
, 2016
, “A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings
,” Proc. Inst. Mech. Eng., Part J
, 230
(12
), pp. 1470
–1482
. 10.1177/1350650116638610143.
Liu
, H.
, Xu
, H.
, Ellison
, P. J.
, and Jin
, Z.
, 2010
, “Application of Computational Fluid Dynamics and Fluid-Structure Interaction Method to the Lubrication Study of a Rotor-Bearing System
,” Tribol. Lett.
, 38
, pp. 324
–336
. 10.1007/s11249-010-9612-6144.
Concli
, F.
, 2016
, “Pressure Distribution in Small Hydrodynamic Journal Bearings Considering Cavitation: a Numerical Approach Based on the Opensource CFD Code OpenFOAM®
,” Lubr. Sci.
, 28
(6
), pp. 329
–347
. 10.1002/ls.1334145.
Crone
, P.
, Almqvist
, A.
, and Larsson
, R.
, 2018
, “Thermal Turbulent Flow in Leading Edge Grooved and Conventional Tilting Pad Journal Bearing Segments—A Comparative Study
,” Lubricants
, 6
(4
), p. 97
. 10.3390/lubricants6040097146.
Maneshian
, B.
, and Gandjalikhan Nassab
, S. A.
, 2009
, “Thermohydrodynamic Characteristics of Journal Bearings Running Under Turbulent Condition
,” Int. J. Eng., Trans. A
, 22
(2
), pp. 181
–194
.147.
Montazeri
, H.
, 2008
, “Numerical Analysis of Hydrodynamic Journal Bearings Lubricated With Ferrofluid
,” Proc. Inst. Mech. Eng., Part J
, 222
(1
), pp. 51
–60
. 10.1243/13506501JET314148.
Gertzos
, K. P.
, Nikolakopoulos
, P. G.
, and Papadopoulos
, C. A.
, 2008
, “CFD Analysis of Journal Bearing Hydrodynamic Lubrication by Bingham Lubricant
,” Tribol. Int.
, 41
(12
), pp. 1190
–1204
. 10.1016/j.triboint.2008.03.002149.
Gao
, G.
, Yin
, Z.
, Jiang
, D.
, and Zhang
, X.
, 2013
, “CFD Analysis of Load-Carrying Capacity of Hydrodynamic Lubrication on a Water-Lubricated Journal Bearing
,” Ind. Lubr. Tribol.
, 67
(1
), pp. 30
–37
. 10.1108/ilt-03-2013-0028150.
Gao
, G.
, Yin
, Z.
, Jiang
, D.
, and Zhang
, X.
, 2014
, “Numerical Analysis of Plain Journal Bearing Under Hydrodynamic Lubrication by Water
,” Tribol. Int.
, 75
, pp. 31
–38
. 10.1016/j.triboint.2014.03.009151.
Gao
, G.
, Yin
, Z.
, Jiang
, D.
, Zhang
, X.
, and Wang
, Y.
, 2015
, “Analysis on Design Parameters of Water-Lubricated Journal Bearings Under Hydrodynamic Lubrication
,” Proc. Inst. Mech. Eng., Part J
, 230
(8
), pp. 1019
–1029
. 10.1177/1350650115623201152.
Wang
, Y.
, Yin
, Z.
, Jiang
, D.
, Gao
, G.
, and Zhang
, X.
, 2015
, “Study of the Lubrication Performance of Water-Lubricated Journal Bearings With CFD and FSI Method
,” Ind. Lubr. Tribol.
, 68
(3
), pp. 341
–348
. 10.1108/ILT-04-2015-0053153.
Zhang
, X.
, Yinn
, Z.
, Jiang
, D.
, Gao
, G.
, Wang
, Y.
, and Wang
, X.
, 2016
, “Load Carrying Capacity of Misaligned Hydrodynamic Water-Lubricated Plain Journal Bearings With Rigid Bush Materials
,” Tribol. Int.
, 99
, pp. 1
–13
. 10.1016/j.triboint.2016.02.038154.
Arghir
, M.
, Roucou
, N.
, Helene
, M.
, and Frene
, J.
, 2003
, “Theoretical Analysis of the Incompressible Laminar Flow in a Macro-Roughness Cell
,” ASME J. Tribol.
, 125
(2
), pp. 309
–318
. 10.1115/1.1506328155.
Brajdic-Mitidieri
, P.
, Gosman
, A. D.
, Ioannides
, E.
, and Spikes
, H. A.
, 2005
, “CFD Analysis of a Low Friction Pocketed Pad Bearing
,” ASME J. Tribol.
, 127
(4
), pp. 803
–812
. 10.1115/1.2032990156.
Sahlin
, F.
, Glavatskih
, S. B.
, Almqvist
, T.
, and Larsson
, R.
, 2005
, “Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication
,” ASME J. Tribol.
, 127
(1
), pp. 96
–102
. 10.1115/1.1828067157.
Han
, J.
, Fang
, L.
, Sun
, J.
, and Ge
, S.
, 2010
, “Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD
,” Tribol. Trans.
, 53
(6
), pp. 860
–870
. 10.1080/10402004.2010.496070158.
Liang
, X.
, Liu
, Z.
, Wang
, H.
, Zhou
, X.
, and Zhou
, X.
, 2016
, “Hydrodynamic Lubrication of Partial Textured Sliding Journal Bearing Based on Three-Dimensional CFD
,” Ind. Lubr. Tribol.
, 68
(1
), pp. 106
–115
. 10.1108/ILT-04-2015-0055159.
Fu
, G.
, and Untaroiu
, A.
, 2017
, “A Study of the Effect of Various Recess Shapes on Hybrid Journal Bearing Performance Using Computational Fluid Dynamics and Response Surface Method
,” ASME J. Tribol.
, 139
(6
), p. 061104
. 10.1115/1.4036447160.
Yang
, J.
, and Palazzolo
, A.
, 2020
, “Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part I: TEHD-CFD Model Validation and Improvements
,” ASME J. Tribol.
, 143
(1
), p. 011801
. 10.1115/1.4047750161.
Yang
, J.
, and Palazzolo
, A.
, 2020
, “Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part II: Implementation With Machine Learning
,” ASME J. Tribol.
, 143
(1
), p. 011802
. 10.1115/1.4047751Copyright © 2020 by ASME
You do not currently have access to this content.
